Changeset View
Changeset View
Standalone View
Standalone View
site-modules/profile/templates/netbox/configuration.py.erb
- This file was added.
######################### | |||||
# # | |||||
# Required settings # | |||||
# # | |||||
######################### | |||||
# This is a list of valid fully-qualified domain names (FQDNs) for the NetBox server. NetBox will not permit write | |||||
# access to the server via any other hostnames. The first FQDN in the list will be treated as the preferred name. | |||||
# | |||||
# Example: ALLOWED_HOSTS = ['netbox.example.com', 'netbox.internal.local'] | |||||
ALLOWED_HOSTS = [ | |||||
<%- @allowed_hosts.each do |host| -%> | |||||
"<%= host %>", | |||||
<%- end -%>] | |||||
# PostgreSQL database configuration. See the Django documentation for a complete list of available parameters: | |||||
# https://docs.djangoproject.com/en/stable/ref/settings/#databases | |||||
DATABASE = { | |||||
'NAME': '<%= @db_database %>', # Database name | |||||
'USER': '<%= @db_username %>', # PostgreSQL username | |||||
'PASSWORD': '<%= @db_password %>', # PostgreSQL password | |||||
'HOST': '<%= @db_host %>', # Database server | |||||
'PORT': '<%= @db_port %>', # Database port (leave blank for default) | |||||
'CONN_MAX_AGE': 300, # Max database connection age | |||||
} | |||||
# Redis database settings. Redis is used for caching and for queuing background tasks such as webhook events. A separate | |||||
# configuration exists for each. Full connection details are required in both sections, and it is strongly recommended | |||||
# to use two separate database IDs. | |||||
REDIS = { | |||||
'tasks': { | |||||
'HOST': '<%= @redis_host %>', | |||||
'PORT': <%= @redis_port %>, | |||||
ardumont: Should use the `redis_host` and `redis_port` variables to avoid scratching heads later when the… | |||||
Done Inline Actionsgood catch, it's fixed vsellier: good catch, it's fixed | |||||
# Comment out `HOST` and `PORT` lines and uncomment the following if using Redis Sentinel | |||||
# 'SENTINELS': [('mysentinel.redis.example.com', 6379)], | |||||
# 'SENTINEL_SERVICE': 'netbox', | |||||
'PASSWORD': '<%= @redis_password %>', | |||||
'DATABASE': 0, | |||||
'DEFAULT_TIMEOUT': 300, | |||||
'SSL': False, | |||||
}, | |||||
'caching': { | |||||
'HOST': '<%= @redis_host %>', | |||||
'PORT': <%= @redis_port %>, | |||||
Done Inline Actionssame, i guess. ardumont: same, i guess. | |||||
# Comment out `HOST` and `PORT` lines and uncomment the following if using Redis Sentinel | |||||
# 'SENTINELS': [('mysentinel.redis.example.com', 6379)], | |||||
# 'SENTINEL_SERVICE': 'netbox', | |||||
'PASSWORD': '<%= @redis_password %>', | |||||
'DATABASE': 1, | |||||
'DEFAULT_TIMEOUT': 300, | |||||
'SSL': False, | |||||
} | |||||
} | |||||
# This key is used for secure generation of random numbers and strings. It must never be exposed outside of this file. | |||||
# For optimal security, SECRET_KEY should be at least 50 characters in length and contain a mix of letters, numbers, and | |||||
# symbols. NetBox will not run without this defined. For more information, see | |||||
# https://docs.djangoproject.com/en/stable/ref/settings/#std:setting-SECRET_KEY | |||||
SECRET_KEY = '<%= @secret_key %>' | |||||
######################### | |||||
# # | |||||
# Optional settings # | |||||
# # | |||||
######################### | |||||
# Specify one or more name and email address tuples representing NetBox administrators. These people will be notified of | |||||
# application errors (assuming correct email settings are provided). | |||||
ADMINS = [ | |||||
# ['John Doe', 'jdoe@example.com'], | |||||
] | |||||
# URL schemes that are allowed within links in NetBox | |||||
ALLOWED_URL_SCHEMES = ( | |||||
'file', 'ftp', 'ftps', 'http', 'https', 'irc', 'mailto', 'sftp', 'ssh', 'tel', 'telnet', 'tftp', 'vnc', 'xmpp', | |||||
) | |||||
# Optionally display a persistent banner at the top and/or bottom of every page. HTML is allowed. To display the same | |||||
# content in both banners, define BANNER_TOP and set BANNER_BOTTOM = BANNER_TOP. | |||||
BANNER_TOP = '' | |||||
BANNER_BOTTOM = '' | |||||
# Text to include on the login page above the login form. HTML is allowed. | |||||
BANNER_LOGIN = '' | |||||
# Base URL path if accessing NetBox within a directory. For example, if installed at http://example.com/netbox/, set: | |||||
# BASE_PATH = 'netbox/' | |||||
BASE_PATH = '' | |||||
# Cache timeout in seconds. Set to 0 to dissable caching. Defaults to 900 (15 minutes) | |||||
CACHE_TIMEOUT = 900 | |||||
# Maximum number of days to retain logged changes. Set to 0 to retain changes indefinitely. (Default: 90) | |||||
CHANGELOG_RETENTION = 90 | |||||
# API Cross-Origin Resource Sharing (CORS) settings. If CORS_ORIGIN_ALLOW_ALL is set to True, all origins will be | |||||
# allowed. Otherwise, define a list of allowed origins using either CORS_ORIGIN_WHITELIST or | |||||
# CORS_ORIGIN_REGEX_WHITELIST. For more information, see https://github.com/ottoyiu/django-cors-headers | |||||
CORS_ORIGIN_ALLOW_ALL = False | |||||
CORS_ORIGIN_WHITELIST = [ | |||||
# 'https://hostname.example.com', | |||||
] | |||||
CORS_ORIGIN_REGEX_WHITELIST = [ | |||||
# r'^(https?://)?(\w+\.)?example\.com$', | |||||
] | |||||
# Set to True to enable server debugging. WARNING: Debugging introduces a substantial performance penalty and may reveal | |||||
# sensitive information about your installation. Only enable debugging while performing testing. Never enable debugging | |||||
# on a production system. | |||||
DEBUG = False | |||||
# Email settings | |||||
EMAIL = { | |||||
'SERVER': '<%= @smtp_host %>', | |||||
'PORT': 25, | |||||
'USERNAME': '', | |||||
'PASSWORD': '', | |||||
'USE_SSL': False, | |||||
'USE_TLS': False, | |||||
'TIMEOUT': 10, # seconds | |||||
'FROM_EMAIL': '<%= @email_from %>', | |||||
} | |||||
# Enforcement of unique IP space can be toggled on a per-VRF basis. To enforce unique IP space within the global table | |||||
# (all prefixes and IP addresses not assigned to a VRF), set ENFORCE_GLOBAL_UNIQUE to True. | |||||
ENFORCE_GLOBAL_UNIQUE = False | |||||
# Exempt certain models from the enforcement of view permissions. Models listed here will be viewable by all users and | |||||
# by anonymous users. List models in the form `<app>.<model>`. Add '*' to this list to exempt all models. | |||||
EXEMPT_VIEW_PERMISSIONS = [ | |||||
# 'dcim.site', | |||||
# 'dcim.region', | |||||
# 'ipam.prefix', | |||||
] | |||||
# HTTP proxies NetBox should use when sending outbound HTTP requests (e.g. for webhooks). | |||||
# HTTP_PROXIES = { | |||||
# 'http': 'http://10.10.1.10:3128', | |||||
# 'https': 'http://10.10.1.10:1080', | |||||
# } | |||||
# IP addresses recognized as internal to the system. The debugging toolbar will be available only to clients accessing | |||||
# NetBox from an internal IP. | |||||
INTERNAL_IPS = ('127.0.0.1', '::1') | |||||
# Enable custom logging. Please see the Django documentation for detailed guidance on configuring custom logs: | |||||
# https://docs.djangoproject.com/en/stable/topics/logging/ | |||||
LOGGING = {} | |||||
# Setting this to True will permit only authenticated users to access any part of NetBox. By default, anonymous users | |||||
# are permitted to access most data in NetBox (excluding secrets) but not make any changes. | |||||
LOGIN_REQUIRED = False | |||||
# The length of time (in seconds) for which a user will remain logged into the web UI before being prompted to | |||||
# re-authenticate. (Default: 1209600 [14 days]) | |||||
LOGIN_TIMEOUT = None | |||||
# Setting this to True will display a "maintenance mode" banner at the top of every page. | |||||
MAINTENANCE_MODE = False | |||||
# An API consumer can request an arbitrary number of objects =by appending the "limit" parameter to the URL (e.g. | |||||
# "?limit=1000"). This setting defines the maximum limit. Setting it to 0 or None will allow an API consumer to request | |||||
# all objects by specifying "?limit=0". | |||||
MAX_PAGE_SIZE = 1000 | |||||
# The file path where uploaded media such as image attachments are stored. A trailing slash is not needed. Note that | |||||
# the default value of this setting is derived from the installed location. | |||||
MEDIA_ROOT = '<%= @media_directory %>' | |||||
# By default uploaded media is stored on the local filesystem. Using Django-storages is also supported. Provide the | |||||
# class path of the storage driver in STORAGE_BACKEND and any configuration options in STORAGE_CONFIG. For example: | |||||
# STORAGE_BACKEND = 'storages.backends.s3boto3.S3Boto3Storage' | |||||
# STORAGE_CONFIG = { | |||||
# 'AWS_ACCESS_KEY_ID': 'Key ID', | |||||
# 'AWS_SECRET_ACCESS_KEY': 'Secret', | |||||
# 'AWS_STORAGE_BUCKET_NAME': 'netbox', | |||||
# 'AWS_S3_REGION_NAME': 'eu-west-1', | |||||
# } | |||||
# Expose Prometheus monitoring metrics at the HTTP endpoint '/metrics' | |||||
METRICS_ENABLED = True | |||||
# Credentials that NetBox will uses to authenticate to devices when connecting via NAPALM. | |||||
NAPALM_USERNAME = '' | |||||
NAPALM_PASSWORD = '' | |||||
# NAPALM timeout (in seconds). (Default: 30) | |||||
NAPALM_TIMEOUT = 30 | |||||
# NAPALM optional arguments (see http://napalm.readthedocs.io/en/latest/support/#optional-arguments). Arguments must | |||||
# be provided as a dictionary. | |||||
NAPALM_ARGS = {} | |||||
# Determine how many objects to display per page within a list. (Default: 50) | |||||
PAGINATE_COUNT = 50 | |||||
# Enable installed plugins. Add the name of each plugin to the list. | |||||
PLUGINS = [] | |||||
# Plugins configuration settings. These settings are used by various plugins that the user may have installed. | |||||
# Each key in the dictionary is the name of an installed plugin and its value is a dictionary of settings. | |||||
# PLUGINS_CONFIG = { | |||||
# 'my_plugin': { | |||||
# 'foo': 'bar', | |||||
# 'buzz': 'bazz' | |||||
# } | |||||
# } | |||||
# When determining the primary IP address for a device, IPv6 is preferred over IPv4 by default. Set this to True to | |||||
# prefer IPv4 instead. | |||||
PREFER_IPV4 = False | |||||
# Rack elevation size defaults, in pixels. For best results, the ratio of width to height should be roughly 10:1. | |||||
RACK_ELEVATION_DEFAULT_UNIT_HEIGHT = 22 | |||||
RACK_ELEVATION_DEFAULT_UNIT_WIDTH = 220 | |||||
# Remote authentication support | |||||
REMOTE_AUTH_ENABLED = False | |||||
REMOTE_AUTH_BACKEND = 'netbox.authentication.RemoteUserBackend' | |||||
REMOTE_AUTH_HEADER = 'HTTP_REMOTE_USER' | |||||
REMOTE_AUTH_AUTO_CREATE_USER = True | |||||
REMOTE_AUTH_DEFAULT_GROUPS = [] | |||||
REMOTE_AUTH_DEFAULT_PERMISSIONS = {} | |||||
# This determines how often the GitHub API is called to check the latest release of NetBox. Must be at least 1 hour. | |||||
RELEASE_CHECK_TIMEOUT = 24 * 3600 | |||||
# This repository is used to check whether there is a new release of NetBox available. Set to None to disable the | |||||
# version check or use the URL below to check for release in the official NetBox repository. | |||||
RELEASE_CHECK_URL = None | |||||
# RELEASE_CHECK_URL = 'https://api.github.com/repos/netbox-community/netbox/releases' | |||||
# The file path where custom reports will be stored. A trailing slash is not needed. Note that the default value of | |||||
# this setting is derived from the installed location. | |||||
REPORTS_ROOT = '<%= @reports_dir %>' | |||||
# The file path where custom scripts will be stored. A trailing slash is not needed. Note that the default value of | |||||
# this setting is derived from the installed location. | |||||
SCRIPTS_ROOT = '<%= @scripts_directory %>' | |||||
# By default, NetBox will store session data in the database. Alternatively, a file path can be specified here to use | |||||
# local file storage instead. (This can be useful for enabling authentication on a standby instance with read-only | |||||
# database access.) Note that the user as which NetBox runs must have read and write permissions to this path. | |||||
SESSION_FILE_PATH = None | |||||
# Time zone (default: UTC) | |||||
TIME_ZONE = 'UTC' | |||||
# Date/time formatting. See the following link for supported formats: | |||||
# https://docs.djangoproject.com/en/stable/ref/templates/builtins/#date | |||||
DATE_FORMAT = 'N j, Y' | |||||
SHORT_DATE_FORMAT = 'Y-m-d' | |||||
TIME_FORMAT = 'g:i a' | |||||
SHORT_TIME_FORMAT = 'H:i:s' | |||||
DATETIME_FORMAT = 'N j, Y g:i a' | |||||
SHORT_DATETIME_FORMAT = 'Y-m-d H:i' |
Should use the redis_host and redis_port variables to avoid scratching heads later when the default values change.