diff --git a/files/sudoers.rhel7 b/files/sudoers.rhel7
new file mode 100644
index 0000000..414fc5f
--- /dev/null
+++ b/files/sudoers.rhel7
@@ -0,0 +1,118 @@
+## Sudoers allows particular users to run various commands as
+## the root user, without needing the root password.
+##
+## Examples are provided at the bottom of the file for collections
+## of related commands, which can then be delegated out to particular
+## users or groups.
+## 
+## This file must be edited with the 'visudo' command.
+
+## Host Aliases
+## Groups of machines. You may prefer to use hostnames (perhaps using 
+## wildcards for entire domains) or IP addresses instead.
+# Host_Alias     FILESERVERS = fs1, fs2
+# Host_Alias     MAILSERVERS = smtp, smtp2
+
+## User Aliases
+## These aren't often necessary, as you can use regular groups
+## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname 
+## rather than USERALIAS
+# User_Alias ADMINS = jsmith, mikem
+
+
+## Command Aliases
+## These are groups of related commands...
+
+## Networking
+# Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool
+
+## Installation and management of software
+# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
+
+## Services
+# Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig
+
+## Updating the locate database
+# Cmnd_Alias LOCATE = /usr/bin/updatedb
+
+## Storage
+# Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
+
+## Delegating permissions
+# Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp 
+
+## Processes
+# Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall
+
+## Drivers
+# Cmnd_Alias DRIVERS = /sbin/modprobe
+
+# Defaults specification
+
+#
+# Disable "ssh hostname sudo <cmd>", because it will show the password in clear. 
+#         You have to run "ssh -t hostname sudo <cmd>".
+#
+Defaults    requiretty
+
+#
+# Refuse to run if unable to disable echo on the tty. This setting should also be
+# changed in order to be able to use sudo without a tty. See requiretty above.
+#
+Defaults   !visiblepw
+
+#
+# Preserving HOME has security implications since many programs
+# use it when searching for configuration files. Note that HOME
+# is already set when the the env_reset option is enabled, so
+# this option is only effective for configurations where either
+# env_reset is disabled or HOME is present in the env_keep list.
+#
+Defaults    always_set_home
+
+Defaults    env_reset
+Defaults    env_keep =  "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR LS_COLORS"
+Defaults    env_keep += "MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE"
+Defaults    env_keep += "LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES"
+Defaults    env_keep += "LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE"
+Defaults    env_keep += "LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY"
+
+#
+# Adding HOME to env_keep may enable a user to run unrestricted
+# commands via sudo.
+#
+# Defaults   env_keep += "HOME"
+
+Defaults    secure_path = /sbin:/bin:/usr/sbin:/usr/bin
+
+## Next comes the main part: which users can run what software on 
+## which machines (the sudoers file can be shared between multiple
+## systems).
+## Syntax:
+##
+## 	user	MACHINE=COMMANDS
+##
+## The COMMANDS section may have other options added to it.
+##
+## Allow root to run any commands anywhere 
+root	ALL=(ALL) 	ALL
+
+## Allows members of the 'sys' group to run networking, software, 
+## service management apps and more.
+# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS
+
+## Allows people in group wheel to run all commands
+# %wheel	ALL=(ALL)	ALL
+
+## Same thing without a password
+# %wheel	ALL=(ALL)	NOPASSWD: ALL
+
+## Allows members of the users group to mount and unmount the 
+## cdrom as root
+# %users  ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom
+
+## Allows members of the users group to shutdown this system
+# %users  localhost=/sbin/shutdown -h now
+
+## Read drop-in files from /etc/sudoers.d (the # here does not mean a comment)
+#includedir /etc/sudoers.d
diff --git a/manifests/params.pp b/manifests/params.pp
index 0ae9570..9d13d46 100644
--- a/manifests/params.pp
+++ b/manifests/params.pp
@@ -1,162 +1,163 @@
 #class sudo::params 
 #Set the paramters for the sudo module
 class sudo::params {
   $source_base = "puppet:///modules/${module_name}/"
 
   case $::osfamily {
     debian: {
       case $::operatingsystem {
         'Ubuntu': {
           $source = "${source_base}sudoers.ubuntu"
         }
         default: {
 
           case $::lsbdistcodename {
             'wheezy': {
               $source = "${source_base}sudoers.wheezy"
             }
             default: {
               $source = "${source_base}sudoers.deb"
             }
           }
         }
       }
       $package           = 'sudo'
       $package_ensure    = 'present'
       $package_source    = ''
       $package_admin_file = ''
       $config_file       = '/etc/sudoers'
       $config_dir        = '/etc/sudoers.d/'
       $config_file_group = 'root'
     }
     redhat: {
       $package = 'sudo'
 
       # rhel 5.0 to 5.4 use sudo 1.6.9 which does not support
       # includedir, so we have to make sure sudo 1.7 (comes with rhel
       # 5.5) is installed.
       $package_ensure = $::operatingsystemrelease ? {
         /^5.[01234]/ => 'latest',
         default      => 'present',
       }
       $package_source = ''
       $package_admin_file = ''
       $config_file = '/etc/sudoers'
       $config_dir = '/etc/sudoers.d/'
       $source = $::operatingsystemrelease ? {
         /^5/    => "${source_base}sudoers.rhel5",
         /^6/    => "${source_base}sudoers.rhel6",
+        /^7/    => "${source_base}sudoers.rhel7",
         default => "${source_base}sudoers.rhel6",
         }
       $config_file_group = 'root'
     }
     suse: {
       $package = 'sudo'
       $package_ensure = 'present'
       $package_source = ''
       $package_admin_file = ''
       $config_file = '/etc/sudoers'
       $config_dir = '/etc/sudoers.d/'
       $source = "${source_base}sudoers.suse"
       $config_file_group = 'root'
     }
     solaris: {
       case $::operatingsystem {
         'OmniOS': {
           $package = 'sudo'
           $package_ensure = 'present'
           $package_source = ''
           $package_admin_file = ''
           $config_file = '/etc/sudoers'
           $config_dir = '/etc/sudoers.d/'
           $source = "${source_base}sudoers.omnios"
           $config_file_group = 'root'
         }
         default: {
           case $::kernelrelease {
             '5.11': {
               $package = 'pkg://solaris/security/sudo'
               $package_ensure = 'present'
               $package_source = ''
               $package_admin_file = ''
               $config_file = '/etc/sudoers'
               $config_dir = '/etc/sudoers.d/'
               $source = "${source_base}sudoers.solaris"
               $config_file_group = 'root'
             }
             '5.10': {
               $package = 'TCMsudo'
               $package_ensure = 'present'
               $package_source = 'http://www.sudo.ws/sudo/dist/packages/Solaris/10/TCMsudo-1.8.9p5-i386.pkg.gz'
               $package_admin_file = '/var/sadm/install/admin/puppet'
               $config_file = '/etc/sudoers'
               $config_dir = '/etc/sudoers.d/'
               $source = "${source_base}sudoers.solaris"
               $config_file_group = 'root'
             }
             default: {
               fail("Unsupported platform: ${::osfamily}/${::operatingsystem}/${::kernelrelease}")
             }
           }
         }
       }
     }
     freebsd: {
       $package = 'security/sudo'
       $package_ensure = 'present'
       $package_source = ''
       $package_admin_file = ''
       $config_file = '/usr/local/etc/sudoers'
       $config_dir = '/usr/local/etc/sudoers.d/'
       $source = "${source_base}sudoers.freebsd"
       $config_file_group = 'wheel'
     }
     aix: {
       $package = 'sudo'
       $package_ensure = 'present'
       $package_source = 'http://www.sudo.ws/sudo/dist/packages/AIX/5.3/sudo-1.8.9-6.aix53.lam.rpm'
       $package_admin_file = ''
       $config_file = '/etc/sudoers'
       $config_dir = '/etc/sudoers.d/'
       $source = "${source_base}sudoers.aix"
       $config_file_group = 'system'
     }
     default: {
       case $::operatingsystem {
         gentoo: {
           $package = 'sudo'
           $package_ensure = 'present'
           $config_file = '/etc/sudoers'
           $config_dir = '/etc/sudoers.d/'
           $source = "${source_base}sudoers.deb"
           $config_file_group = 'root'
         }
         archlinux: {
           $package = 'sudo'
           $package_ensure = 'present'
           $config_file = '/etc/sudoers'
           $config_dir = '/etc/sudoers.d/'
           $source = "${source_base}sudoers.archlinux"
           $config_file_group = 'root'
         }
         amazon: {
           $package = 'sudo'
           $package_ensure = 'present'
           $config_file = '/etc/sudoers'
           $config_dir = '/etc/sudoers.d/'
           $source = $::operatingsystemrelease ? {
             /^5/    => "${source_base}sudoers.rhel5",
             /^6/    => "${source_base}sudoers.rhel6",
             default => "${source_base}sudoers.rhel6",
           }
           $config_file_group = 'root'
         }
         default: {
           fail("Unsupported platform: ${::osfamily}/${::operatingsystem}")
         }
       }
       $package_source = ''
       $package_admin_file = ''
     }
   }
 }