self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' body = None headers = {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'} retries = Retry(total=0, connect=None, read=None, redirect=None, status=None) redirect = False, assert_same_host = False timeout = Timeout(connect=None, read=None, total=None), pool_timeout = None release_conn = False, chunked = False, body_pos = None response_kw = {'decode_content': False, 'preload_content': False} parsed_url = Url(scheme=None, auth=None, host=None, port=None, path='/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021', query='edges=%2A&direction=forward', fragment=None) destination_scheme = None, conn = None, release_this_conn = True http_tunnel_required = False, err = None, clean_exit = False def urlopen( self, method, url, body=None, headers=None, retries=None, redirect=True, assert_same_host=True, timeout=_Default, pool_timeout=None, release_conn=None, chunked=False, body_pos=None, **response_kw ): """ Get a connection from the pool and perform an HTTP request. This is the lowest level call for making a request, so you'll need to specify all the raw details. .. note:: More commonly, it's appropriate to use a convenience method provided by :class:`.RequestMethods`, such as :meth:`request`. .. note:: `release_conn` will only behave as expected if `preload_content=False` because we want to make `preload_content=False` the default behaviour someday soon without breaking backwards compatibility. :param method: HTTP request method (such as GET, POST, PUT, etc.) :param url: The URL to perform the request on. :param body: Data to send in the request body, either :class:`str`, :class:`bytes`, an iterable of :class:`str`/:class:`bytes`, or a file-like object. :param headers: Dictionary of custom headers to send, such as User-Agent, If-None-Match, etc. If None, pool headers are used. If provided, these headers completely replace any pool-specific headers. :param retries: Configure the number of retries to allow before raising a :class:`~urllib3.exceptions.MaxRetryError` exception. Pass ``None`` to retry until you receive a response. Pass a :class:`~urllib3.util.retry.Retry` object for fine-grained control over different types of retries. Pass an integer number to retry connection errors that many times, but no other types of errors. Pass zero to never retry. If ``False``, then retries are disabled and any exception is raised immediately. Also, instead of raising a MaxRetryError on redirects, the redirect response will be returned. :type retries: :class:`~urllib3.util.retry.Retry`, False, or an int. :param redirect: If True, automatically handle redirects (status codes 301, 302, 303, 307, 308). Each redirect counts as a retry. Disabling retries will disable redirect, too. :param assert_same_host: If ``True``, will make sure that the host of the pool requests is consistent else will raise HostChangedError. When ``False``, you can use the pool on an HTTP proxy and request foreign hosts. :param timeout: If specified, overrides the default timeout for this one request. It may be a float (in seconds) or an instance of :class:`urllib3.util.Timeout`. :param pool_timeout: If set and the pool is set to block=True, then this method will block for ``pool_timeout`` seconds and raise EmptyPoolError if no connection is available within the time period. :param release_conn: If False, then the urlopen call will not release the connection back into the pool once a response is received (but will release if you read the entire contents of the response such as when `preload_content=True`). This is useful if you're not preloading the response's content immediately. You will need to call ``r.release_conn()`` on the response ``r`` to return the connection back into the pool. If None, it takes the value of ``response_kw.get('preload_content', True)``. :param chunked: If True, urllib3 will send the body using chunked transfer encoding. Otherwise, urllib3 will send the body using the standard content-length form. Defaults to False. :param int body_pos: Position to seek to in file-like body in the event of a retry or redirect. Typically this won't need to be set because urllib3 will auto-populate the value when needed. :param \\**response_kw: Additional parameters are passed to :meth:`urllib3.response.HTTPResponse.from_httplib` """ parsed_url = parse_url(url) destination_scheme = parsed_url.scheme if headers is None: headers = self.headers if not isinstance(retries, Retry): retries = Retry.from_int(retries, redirect=redirect, default=self.retries) if release_conn is None: release_conn = response_kw.get("preload_content", True) # Check host if assert_same_host and not self.is_same_host(url): raise HostChangedError(self, url, retries) # Ensure that the URL we're connecting to is properly encoded if url.startswith("/"): url = six.ensure_str(_encode_target(url)) else: url = six.ensure_str(parsed_url.url) conn = None # Track whether `conn` needs to be released before # returning/raising/recursing. Update this variable if necessary, and # leave `release_conn` constant throughout the function. That way, if # the function recurses, the original value of `release_conn` will be # passed down into the recursive call, and its value will be respected. # # See issue #651 [1] for details. # # [1] <https://github.com/urllib3/urllib3/issues/651> release_this_conn = release_conn http_tunnel_required = connection_requires_http_tunnel( self.proxy, self.proxy_config, destination_scheme ) # Merge the proxy headers. Only done when not using HTTP CONNECT. We # have to copy the headers dict so we can safely change it without those # changes being reflected in anyone else's copy. if not http_tunnel_required: headers = headers.copy() headers.update(self.proxy_headers) # Must keep the exception bound to a separate variable or else Python 3 # complains about UnboundLocalError. err = None # Keep track of whether we cleanly exited the except block. This # ensures we do proper cleanup in finally. clean_exit = False # Rewind body position, if needed. Record current position # for future rewinds in the event of a redirect/retry. body_pos = set_file_position(body, body_pos) try: # Request a connection from the queue. timeout_obj = self._get_timeout(timeout) conn = self._get_conn(timeout=pool_timeout) conn.timeout = timeout_obj.connect_timeout is_new_proxy_conn = self.proxy is not None and not getattr( conn, "sock", None ) if is_new_proxy_conn and http_tunnel_required: self._prepare_proxy(conn) # Make the request on the httplib connection object. httplib_response = self._make_request( conn, method, url, timeout=timeout_obj, body=body, headers=headers, > chunked=chunked, ) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:706: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> conn = <urllib3.connection.HTTPConnection object at 0x7efcd6cf2ba8> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' timeout = Timeout(connect=None, read=None, total=None), chunked = False httplib_request_kw = {'body': None, 'headers': {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'}} timeout_obj = Timeout(connect=None, read=None, total=None), read_timeout = None def _make_request( self, conn, method, url, timeout=_Default, chunked=False, **httplib_request_kw ): """ Perform a request on a given urllib connection object taken from our pool. :param conn: a connection from one of our connection pools :param timeout: Socket timeout in seconds for the request. This can be a float or integer, which will set the same timeout value for the socket connect and the socket read, or an instance of :class:`urllib3.util.Timeout`, which gives you more fine-grained control over your timeouts. """ self.num_requests += 1 timeout_obj = self._get_timeout(timeout) timeout_obj.start_connect() conn.timeout = timeout_obj.connect_timeout # Trigger any extra validation we need to do. try: self._validate_conn(conn) except (SocketTimeout, BaseSSLError) as e: # Py2 raises this as a BaseSSLError, Py3 raises it as socket timeout. self._raise_timeout(err=e, url=url, timeout_value=conn.timeout) raise # conn.request() calls http.client.*.request, not the method in # urllib3.request. It also calls makefile (recv) on the socket. try: if chunked: conn.request_chunked(method, url, **httplib_request_kw) else: conn.request(method, url, **httplib_request_kw) # We are swallowing BrokenPipeError (errno.EPIPE) since the server is # legitimately able to close the connection after sending a valid response. # With this behaviour, the received response is still readable. except BrokenPipeError: # Python 3 pass except IOError as e: # Python 2 and macOS/Linux # EPIPE and ESHUTDOWN are BrokenPipeError on Python 2, and EPROTOTYPE is needed on macOS # https://erickt.github.io/blog/2014/11/19/adventures-in-debugging-a-potential-osx-kernel-bug/ if e.errno not in { errno.EPIPE, errno.ESHUTDOWN, errno.EPROTOTYPE, }: raise # Reset the timeout for the recv() on the socket read_timeout = timeout_obj.read_timeout # App Engine doesn't have a sock attr if getattr(conn, "sock", None): # In Python 3 socket.py will catch EAGAIN and return None when you # try and read into the file pointer created by http.client, which # instead raises a BadStatusLine exception. Instead of catching # the exception and assuming all BadStatusLine exceptions are read # timeouts, check for a zero timeout before making the request. if read_timeout == 0: raise ReadTimeoutError( self, url, "Read timed out. (read timeout=%s)" % read_timeout ) if read_timeout is Timeout.DEFAULT_TIMEOUT: conn.sock.settimeout(socket.getdefaulttimeout()) else: # None or a value conn.sock.settimeout(read_timeout) # Receive the response from the server try: try: # Python 2.7, use buffering of HTTP responses httplib_response = conn.getresponse(buffering=True) except TypeError: # Python 3 try: httplib_response = conn.getresponse() except BaseException as e: # Remove the TypeError from the exception chain in # Python 3 (including for exceptions like SystemExit). # Otherwise it looks like a bug in the code. > six.raise_from(e, None) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:445: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ value = None, from_value = None > ??? <string>:3: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> conn = <urllib3.connection.HTTPConnection object at 0x7efcd6cf2ba8> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' timeout = Timeout(connect=None, read=None, total=None), chunked = False httplib_request_kw = {'body': None, 'headers': {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'}} timeout_obj = Timeout(connect=None, read=None, total=None), read_timeout = None def _make_request( self, conn, method, url, timeout=_Default, chunked=False, **httplib_request_kw ): """ Perform a request on a given urllib connection object taken from our pool. :param conn: a connection from one of our connection pools :param timeout: Socket timeout in seconds for the request. This can be a float or integer, which will set the same timeout value for the socket connect and the socket read, or an instance of :class:`urllib3.util.Timeout`, which gives you more fine-grained control over your timeouts. """ self.num_requests += 1 timeout_obj = self._get_timeout(timeout) timeout_obj.start_connect() conn.timeout = timeout_obj.connect_timeout # Trigger any extra validation we need to do. try: self._validate_conn(conn) except (SocketTimeout, BaseSSLError) as e: # Py2 raises this as a BaseSSLError, Py3 raises it as socket timeout. self._raise_timeout(err=e, url=url, timeout_value=conn.timeout) raise # conn.request() calls http.client.*.request, not the method in # urllib3.request. It also calls makefile (recv) on the socket. try: if chunked: conn.request_chunked(method, url, **httplib_request_kw) else: conn.request(method, url, **httplib_request_kw) # We are swallowing BrokenPipeError (errno.EPIPE) since the server is # legitimately able to close the connection after sending a valid response. # With this behaviour, the received response is still readable. except BrokenPipeError: # Python 3 pass except IOError as e: # Python 2 and macOS/Linux # EPIPE and ESHUTDOWN are BrokenPipeError on Python 2, and EPROTOTYPE is needed on macOS # https://erickt.github.io/blog/2014/11/19/adventures-in-debugging-a-potential-osx-kernel-bug/ if e.errno not in { errno.EPIPE, errno.ESHUTDOWN, errno.EPROTOTYPE, }: raise # Reset the timeout for the recv() on the socket read_timeout = timeout_obj.read_timeout # App Engine doesn't have a sock attr if getattr(conn, "sock", None): # In Python 3 socket.py will catch EAGAIN and return None when you # try and read into the file pointer created by http.client, which # instead raises a BadStatusLine exception. Instead of catching # the exception and assuming all BadStatusLine exceptions are read # timeouts, check for a zero timeout before making the request. if read_timeout == 0: raise ReadTimeoutError( self, url, "Read timed out. (read timeout=%s)" % read_timeout ) if read_timeout is Timeout.DEFAULT_TIMEOUT: conn.sock.settimeout(socket.getdefaulttimeout()) else: # None or a value conn.sock.settimeout(read_timeout) # Receive the response from the server try: try: # Python 2.7, use buffering of HTTP responses httplib_response = conn.getresponse(buffering=True) except TypeError: # Python 3 try: > httplib_response = conn.getresponse() .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:440: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connection.HTTPConnection object at 0x7efcd6cf2ba8> def getresponse(self): """Get the response from the server. If the HTTPConnection is in the correct state, returns an instance of HTTPResponse or of whatever object is returned by the response_class variable. If a request has not been sent or if a previous response has not be handled, ResponseNotReady is raised. If the HTTP response indicates that the connection should be closed, then it will be closed before the response is returned. When the connection is closed, the underlying socket is closed. """ # if a prior response has been completed, then forget about it. if self.__response and self.__response.isclosed(): self.__response = None # if a prior response exists, then it must be completed (otherwise, we # cannot read this response's header to determine the connection-close # behavior) # # note: if a prior response existed, but was connection-close, then the # socket and response were made independent of this HTTPConnection # object since a new request requires that we open a whole new # connection # # this means the prior response had one of two states: # 1) will_close: this connection was reset and the prior socket and # response operate independently # 2) persistent: the response was retained and we await its # isclosed() status to become true. # if self.__state != _CS_REQ_SENT or self.__response: raise ResponseNotReady(self.__state) if self.debuglevel > 0: response = self.response_class(self.sock, self.debuglevel, method=self._method) else: response = self.response_class(self.sock, method=self._method) try: try: > response.begin() /usr/lib/python3.7/http/client.py:1336: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <http.client.HTTPResponse object at 0x7efcd6cf2c18> def begin(self): if self.headers is not None: # we've already started reading the response return # read until we get a non-100 response while True: > version, status, reason = self._read_status() /usr/lib/python3.7/http/client.py:306: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <http.client.HTTPResponse object at 0x7efcd6cf2c18> def _read_status(self): line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") if len(line) > _MAXLINE: raise LineTooLong("status line") if self.debuglevel > 0: print("reply:", repr(line)) if not line: # Presumably, the server closed the connection before # sending a valid response. > raise RemoteDisconnected("Remote end closed connection without" " response") E http.client.RemoteDisconnected: Remote end closed connection without response /usr/lib/python3.7/http/client.py:275: RemoteDisconnected During handling of the above exception, another exception occurred: self = <requests.adapters.HTTPAdapter object at 0x7efcd6d89f60> request = <PreparedRequest [GET]>, stream = True timeout = Timeout(connect=None, read=None, total=None), verify = True cert = None, proxies = OrderedDict() def send(self, request, stream=False, timeout=None, verify=True, cert=None, proxies=None): """Sends PreparedRequest object. Returns Response object. :param request: The :class:`PreparedRequest <PreparedRequest>` being sent. :param stream: (optional) Whether to stream the request content. :param timeout: (optional) How long to wait for the server to send data before giving up, as a float, or a :ref:`(connect timeout, read timeout) <timeouts>` tuple. :type timeout: float or tuple or urllib3 Timeout object :param verify: (optional) Either a boolean, in which case it controls whether we verify the server's TLS certificate, or a string, in which case it must be a path to a CA bundle to use :param cert: (optional) Any user-provided SSL certificate to be trusted. :param proxies: (optional) The proxies dictionary to apply to the request. :rtype: requests.Response """ try: conn = self.get_connection(request.url, proxies) except LocationValueError as e: raise InvalidURL(e, request=request) self.cert_verify(conn, request.url, verify, cert) url = self.request_url(request, proxies) self.add_headers(request, stream=stream, timeout=timeout, verify=verify, cert=cert, proxies=proxies) chunked = not (request.body is None or 'Content-Length' in request.headers) if isinstance(timeout, tuple): try: connect, read = timeout timeout = TimeoutSauce(connect=connect, read=read) except ValueError as e: # this may raise a string formatting error. err = ("Invalid timeout {}. Pass a (connect, read) " "timeout tuple, or a single float to set " "both timeouts to the same value".format(timeout)) raise ValueError(err) elif isinstance(timeout, TimeoutSauce): pass else: timeout = TimeoutSauce(connect=timeout, read=timeout) try: if not chunked: resp = conn.urlopen( method=request.method, url=url, body=request.body, headers=request.headers, redirect=False, assert_same_host=False, preload_content=False, decode_content=False, retries=self.max_retries, > timeout=timeout ) .tox/py3/lib/python3.7/site-packages/requests/adapters.py:449: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' body = None headers = {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'} retries = Retry(total=2, connect=None, read=None, redirect=None, status=None) redirect = False, assert_same_host = False timeout = Timeout(connect=None, read=None, total=None), pool_timeout = None release_conn = False, chunked = False, body_pos = None response_kw = {'decode_content': False, 'preload_content': False} parsed_url = Url(scheme=None, auth=None, host=None, port=None, path='/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021', query='edges=%2A&direction=forward', fragment=None) destination_scheme = None, conn = None, release_this_conn = True http_tunnel_required = False err = ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response')) clean_exit = False def urlopen( self, method, url, body=None, headers=None, retries=None, redirect=True, assert_same_host=True, timeout=_Default, pool_timeout=None, release_conn=None, chunked=False, body_pos=None, **response_kw ): """ Get a connection from the pool and perform an HTTP request. This is the lowest level call for making a request, so you'll need to specify all the raw details. .. note:: More commonly, it's appropriate to use a convenience method provided by :class:`.RequestMethods`, such as :meth:`request`. .. note:: `release_conn` will only behave as expected if `preload_content=False` because we want to make `preload_content=False` the default behaviour someday soon without breaking backwards compatibility. :param method: HTTP request method (such as GET, POST, PUT, etc.) :param url: The URL to perform the request on. :param body: Data to send in the request body, either :class:`str`, :class:`bytes`, an iterable of :class:`str`/:class:`bytes`, or a file-like object. :param headers: Dictionary of custom headers to send, such as User-Agent, If-None-Match, etc. If None, pool headers are used. If provided, these headers completely replace any pool-specific headers. :param retries: Configure the number of retries to allow before raising a :class:`~urllib3.exceptions.MaxRetryError` exception. Pass ``None`` to retry until you receive a response. Pass a :class:`~urllib3.util.retry.Retry` object for fine-grained control over different types of retries. Pass an integer number to retry connection errors that many times, but no other types of errors. Pass zero to never retry. If ``False``, then retries are disabled and any exception is raised immediately. Also, instead of raising a MaxRetryError on redirects, the redirect response will be returned. :type retries: :class:`~urllib3.util.retry.Retry`, False, or an int. :param redirect: If True, automatically handle redirects (status codes 301, 302, 303, 307, 308). Each redirect counts as a retry. Disabling retries will disable redirect, too. :param assert_same_host: If ``True``, will make sure that the host of the pool requests is consistent else will raise HostChangedError. When ``False``, you can use the pool on an HTTP proxy and request foreign hosts. :param timeout: If specified, overrides the default timeout for this one request. It may be a float (in seconds) or an instance of :class:`urllib3.util.Timeout`. :param pool_timeout: If set and the pool is set to block=True, then this method will block for ``pool_timeout`` seconds and raise EmptyPoolError if no connection is available within the time period. :param release_conn: If False, then the urlopen call will not release the connection back into the pool once a response is received (but will release if you read the entire contents of the response such as when `preload_content=True`). This is useful if you're not preloading the response's content immediately. You will need to call ``r.release_conn()`` on the response ``r`` to return the connection back into the pool. If None, it takes the value of ``response_kw.get('preload_content', True)``. :param chunked: If True, urllib3 will send the body using chunked transfer encoding. Otherwise, urllib3 will send the body using the standard content-length form. Defaults to False. :param int body_pos: Position to seek to in file-like body in the event of a retry or redirect. Typically this won't need to be set because urllib3 will auto-populate the value when needed. :param \\**response_kw: Additional parameters are passed to :meth:`urllib3.response.HTTPResponse.from_httplib` """ parsed_url = parse_url(url) destination_scheme = parsed_url.scheme if headers is None: headers = self.headers if not isinstance(retries, Retry): retries = Retry.from_int(retries, redirect=redirect, default=self.retries) if release_conn is None: release_conn = response_kw.get("preload_content", True) # Check host if assert_same_host and not self.is_same_host(url): raise HostChangedError(self, url, retries) # Ensure that the URL we're connecting to is properly encoded if url.startswith("/"): url = six.ensure_str(_encode_target(url)) else: url = six.ensure_str(parsed_url.url) conn = None # Track whether `conn` needs to be released before # returning/raising/recursing. Update this variable if necessary, and # leave `release_conn` constant throughout the function. That way, if # the function recurses, the original value of `release_conn` will be # passed down into the recursive call, and its value will be respected. # # See issue #651 [1] for details. # # [1] <https://github.com/urllib3/urllib3/issues/651> release_this_conn = release_conn http_tunnel_required = connection_requires_http_tunnel( self.proxy, self.proxy_config, destination_scheme ) # Merge the proxy headers. Only done when not using HTTP CONNECT. We # have to copy the headers dict so we can safely change it without those # changes being reflected in anyone else's copy. if not http_tunnel_required: headers = headers.copy() headers.update(self.proxy_headers) # Must keep the exception bound to a separate variable or else Python 3 # complains about UnboundLocalError. err = None # Keep track of whether we cleanly exited the except block. This # ensures we do proper cleanup in finally. clean_exit = False # Rewind body position, if needed. Record current position # for future rewinds in the event of a redirect/retry. body_pos = set_file_position(body, body_pos) try: # Request a connection from the queue. timeout_obj = self._get_timeout(timeout) conn = self._get_conn(timeout=pool_timeout) conn.timeout = timeout_obj.connect_timeout is_new_proxy_conn = self.proxy is not None and not getattr( conn, "sock", None ) if is_new_proxy_conn and http_tunnel_required: self._prepare_proxy(conn) # Make the request on the httplib connection object. httplib_response = self._make_request( conn, method, url, timeout=timeout_obj, body=body, headers=headers, chunked=chunked, ) # If we're going to release the connection in ``finally:``, then # the response doesn't need to know about the connection. Otherwise # it will also try to release it and we'll have a double-release # mess. response_conn = conn if not release_conn else None # Pass method to Response for length checking response_kw["request_method"] = method # Import httplib's response into our own wrapper object response = self.ResponseCls.from_httplib( httplib_response, pool=self, connection=response_conn, retries=retries, **response_kw ) # Everything went great! clean_exit = True except EmptyPoolError: # Didn't get a connection from the pool, no need to clean up clean_exit = True release_this_conn = False raise except ( TimeoutError, HTTPException, SocketError, ProtocolError, BaseSSLError, SSLError, CertificateError, ) as e: # Discard the connection for these exceptions. It will be # replaced during the next _get_conn() call. clean_exit = False if isinstance(e, (BaseSSLError, CertificateError)): e = SSLError(e) elif isinstance(e, (SocketError, NewConnectionError)) and self.proxy: e = ProxyError("Cannot connect to proxy.", e) elif isinstance(e, (SocketError, HTTPException)): e = ProtocolError("Connection aborted.", e) retries = retries.increment( method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] ) retries.sleep() # Keep track of the error for the retry warning. err = e finally: if not clean_exit: # We hit some kind of exception, handled or otherwise. We need # to throw the connection away unless explicitly told not to. # Close the connection, set the variable to None, and make sure # we put the None back in the pool to avoid leaking it. conn = conn and conn.close() release_this_conn = True if release_this_conn: # Put the connection back to be reused. If the connection is # expired then it will be None, which will get replaced with a # fresh connection during _get_conn. self._put_conn(conn) if not conn: # Try again log.warning( "Retrying (%r) after connection broken by '%r': %s", retries, err, url ) return self.urlopen( method, url, body, headers, retries, redirect, assert_same_host, timeout=timeout, pool_timeout=pool_timeout, release_conn=release_conn, chunked=chunked, body_pos=body_pos, > **response_kw ) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:796: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' body = None headers = {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'} retries = Retry(total=1, connect=None, read=None, redirect=None, status=None) redirect = False, assert_same_host = False timeout = Timeout(connect=None, read=None, total=None), pool_timeout = None release_conn = False, chunked = False, body_pos = None response_kw = {'decode_content': False, 'preload_content': False} parsed_url = Url(scheme=None, auth=None, host=None, port=None, path='/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021', query='edges=%2A&direction=forward', fragment=None) destination_scheme = None, conn = None, release_this_conn = True http_tunnel_required = False err = ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response')) clean_exit = False def urlopen( self, method, url, body=None, headers=None, retries=None, redirect=True, assert_same_host=True, timeout=_Default, pool_timeout=None, release_conn=None, chunked=False, body_pos=None, **response_kw ): """ Get a connection from the pool and perform an HTTP request. This is the lowest level call for making a request, so you'll need to specify all the raw details. .. note:: More commonly, it's appropriate to use a convenience method provided by :class:`.RequestMethods`, such as :meth:`request`. .. note:: `release_conn` will only behave as expected if `preload_content=False` because we want to make `preload_content=False` the default behaviour someday soon without breaking backwards compatibility. :param method: HTTP request method (such as GET, POST, PUT, etc.) :param url: The URL to perform the request on. :param body: Data to send in the request body, either :class:`str`, :class:`bytes`, an iterable of :class:`str`/:class:`bytes`, or a file-like object. :param headers: Dictionary of custom headers to send, such as User-Agent, If-None-Match, etc. If None, pool headers are used. If provided, these headers completely replace any pool-specific headers. :param retries: Configure the number of retries to allow before raising a :class:`~urllib3.exceptions.MaxRetryError` exception. Pass ``None`` to retry until you receive a response. Pass a :class:`~urllib3.util.retry.Retry` object for fine-grained control over different types of retries. Pass an integer number to retry connection errors that many times, but no other types of errors. Pass zero to never retry. If ``False``, then retries are disabled and any exception is raised immediately. Also, instead of raising a MaxRetryError on redirects, the redirect response will be returned. :type retries: :class:`~urllib3.util.retry.Retry`, False, or an int. :param redirect: If True, automatically handle redirects (status codes 301, 302, 303, 307, 308). Each redirect counts as a retry. Disabling retries will disable redirect, too. :param assert_same_host: If ``True``, will make sure that the host of the pool requests is consistent else will raise HostChangedError. When ``False``, you can use the pool on an HTTP proxy and request foreign hosts. :param timeout: If specified, overrides the default timeout for this one request. It may be a float (in seconds) or an instance of :class:`urllib3.util.Timeout`. :param pool_timeout: If set and the pool is set to block=True, then this method will block for ``pool_timeout`` seconds and raise EmptyPoolError if no connection is available within the time period. :param release_conn: If False, then the urlopen call will not release the connection back into the pool once a response is received (but will release if you read the entire contents of the response such as when `preload_content=True`). This is useful if you're not preloading the response's content immediately. You will need to call ``r.release_conn()`` on the response ``r`` to return the connection back into the pool. If None, it takes the value of ``response_kw.get('preload_content', True)``. :param chunked: If True, urllib3 will send the body using chunked transfer encoding. Otherwise, urllib3 will send the body using the standard content-length form. Defaults to False. :param int body_pos: Position to seek to in file-like body in the event of a retry or redirect. Typically this won't need to be set because urllib3 will auto-populate the value when needed. :param \\**response_kw: Additional parameters are passed to :meth:`urllib3.response.HTTPResponse.from_httplib` """ parsed_url = parse_url(url) destination_scheme = parsed_url.scheme if headers is None: headers = self.headers if not isinstance(retries, Retry): retries = Retry.from_int(retries, redirect=redirect, default=self.retries) if release_conn is None: release_conn = response_kw.get("preload_content", True) # Check host if assert_same_host and not self.is_same_host(url): raise HostChangedError(self, url, retries) # Ensure that the URL we're connecting to is properly encoded if url.startswith("/"): url = six.ensure_str(_encode_target(url)) else: url = six.ensure_str(parsed_url.url) conn = None # Track whether `conn` needs to be released before # returning/raising/recursing. Update this variable if necessary, and # leave `release_conn` constant throughout the function. That way, if # the function recurses, the original value of `release_conn` will be # passed down into the recursive call, and its value will be respected. # # See issue #651 [1] for details. # # [1] <https://github.com/urllib3/urllib3/issues/651> release_this_conn = release_conn http_tunnel_required = connection_requires_http_tunnel( self.proxy, self.proxy_config, destination_scheme ) # Merge the proxy headers. Only done when not using HTTP CONNECT. We # have to copy the headers dict so we can safely change it without those # changes being reflected in anyone else's copy. if not http_tunnel_required: headers = headers.copy() headers.update(self.proxy_headers) # Must keep the exception bound to a separate variable or else Python 3 # complains about UnboundLocalError. err = None # Keep track of whether we cleanly exited the except block. This # ensures we do proper cleanup in finally. clean_exit = False # Rewind body position, if needed. Record current position # for future rewinds in the event of a redirect/retry. body_pos = set_file_position(body, body_pos) try: # Request a connection from the queue. timeout_obj = self._get_timeout(timeout) conn = self._get_conn(timeout=pool_timeout) conn.timeout = timeout_obj.connect_timeout is_new_proxy_conn = self.proxy is not None and not getattr( conn, "sock", None ) if is_new_proxy_conn and http_tunnel_required: self._prepare_proxy(conn) # Make the request on the httplib connection object. httplib_response = self._make_request( conn, method, url, timeout=timeout_obj, body=body, headers=headers, chunked=chunked, ) # If we're going to release the connection in ``finally:``, then # the response doesn't need to know about the connection. Otherwise # it will also try to release it and we'll have a double-release # mess. response_conn = conn if not release_conn else None # Pass method to Response for length checking response_kw["request_method"] = method # Import httplib's response into our own wrapper object response = self.ResponseCls.from_httplib( httplib_response, pool=self, connection=response_conn, retries=retries, **response_kw ) # Everything went great! clean_exit = True except EmptyPoolError: # Didn't get a connection from the pool, no need to clean up clean_exit = True release_this_conn = False raise except ( TimeoutError, HTTPException, SocketError, ProtocolError, BaseSSLError, SSLError, CertificateError, ) as e: # Discard the connection for these exceptions. It will be # replaced during the next _get_conn() call. clean_exit = False if isinstance(e, (BaseSSLError, CertificateError)): e = SSLError(e) elif isinstance(e, (SocketError, NewConnectionError)) and self.proxy: e = ProxyError("Cannot connect to proxy.", e) elif isinstance(e, (SocketError, HTTPException)): e = ProtocolError("Connection aborted.", e) retries = retries.increment( method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] ) retries.sleep() # Keep track of the error for the retry warning. err = e finally: if not clean_exit: # We hit some kind of exception, handled or otherwise. We need # to throw the connection away unless explicitly told not to. # Close the connection, set the variable to None, and make sure # we put the None back in the pool to avoid leaking it. conn = conn and conn.close() release_this_conn = True if release_this_conn: # Put the connection back to be reused. If the connection is # expired then it will be None, which will get replaced with a # fresh connection during _get_conn. self._put_conn(conn) if not conn: # Try again log.warning( "Retrying (%r) after connection broken by '%r': %s", retries, err, url ) return self.urlopen( method, url, body, headers, retries, redirect, assert_same_host, timeout=timeout, pool_timeout=pool_timeout, release_conn=release_conn, chunked=chunked, body_pos=body_pos, > **response_kw ) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:796: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' body = None headers = {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'} retries = Retry(total=0, connect=None, read=None, redirect=None, status=None) redirect = False, assert_same_host = False timeout = Timeout(connect=None, read=None, total=None), pool_timeout = None release_conn = False, chunked = False, body_pos = None response_kw = {'decode_content': False, 'preload_content': False} parsed_url = Url(scheme=None, auth=None, host=None, port=None, path='/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021', query='edges=%2A&direction=forward', fragment=None) destination_scheme = None, conn = None, release_this_conn = True http_tunnel_required = False err = ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response')) clean_exit = False def urlopen( self, method, url, body=None, headers=None, retries=None, redirect=True, assert_same_host=True, timeout=_Default, pool_timeout=None, release_conn=None, chunked=False, body_pos=None, **response_kw ): """ Get a connection from the pool and perform an HTTP request. This is the lowest level call for making a request, so you'll need to specify all the raw details. .. note:: More commonly, it's appropriate to use a convenience method provided by :class:`.RequestMethods`, such as :meth:`request`. .. note:: `release_conn` will only behave as expected if `preload_content=False` because we want to make `preload_content=False` the default behaviour someday soon without breaking backwards compatibility. :param method: HTTP request method (such as GET, POST, PUT, etc.) :param url: The URL to perform the request on. :param body: Data to send in the request body, either :class:`str`, :class:`bytes`, an iterable of :class:`str`/:class:`bytes`, or a file-like object. :param headers: Dictionary of custom headers to send, such as User-Agent, If-None-Match, etc. If None, pool headers are used. If provided, these headers completely replace any pool-specific headers. :param retries: Configure the number of retries to allow before raising a :class:`~urllib3.exceptions.MaxRetryError` exception. Pass ``None`` to retry until you receive a response. Pass a :class:`~urllib3.util.retry.Retry` object for fine-grained control over different types of retries. Pass an integer number to retry connection errors that many times, but no other types of errors. Pass zero to never retry. If ``False``, then retries are disabled and any exception is raised immediately. Also, instead of raising a MaxRetryError on redirects, the redirect response will be returned. :type retries: :class:`~urllib3.util.retry.Retry`, False, or an int. :param redirect: If True, automatically handle redirects (status codes 301, 302, 303, 307, 308). Each redirect counts as a retry. Disabling retries will disable redirect, too. :param assert_same_host: If ``True``, will make sure that the host of the pool requests is consistent else will raise HostChangedError. When ``False``, you can use the pool on an HTTP proxy and request foreign hosts. :param timeout: If specified, overrides the default timeout for this one request. It may be a float (in seconds) or an instance of :class:`urllib3.util.Timeout`. :param pool_timeout: If set and the pool is set to block=True, then this method will block for ``pool_timeout`` seconds and raise EmptyPoolError if no connection is available within the time period. :param release_conn: If False, then the urlopen call will not release the connection back into the pool once a response is received (but will release if you read the entire contents of the response such as when `preload_content=True`). This is useful if you're not preloading the response's content immediately. You will need to call ``r.release_conn()`` on the response ``r`` to return the connection back into the pool. If None, it takes the value of ``response_kw.get('preload_content', True)``. :param chunked: If True, urllib3 will send the body using chunked transfer encoding. Otherwise, urllib3 will send the body using the standard content-length form. Defaults to False. :param int body_pos: Position to seek to in file-like body in the event of a retry or redirect. Typically this won't need to be set because urllib3 will auto-populate the value when needed. :param \\**response_kw: Additional parameters are passed to :meth:`urllib3.response.HTTPResponse.from_httplib` """ parsed_url = parse_url(url) destination_scheme = parsed_url.scheme if headers is None: headers = self.headers if not isinstance(retries, Retry): retries = Retry.from_int(retries, redirect=redirect, default=self.retries) if release_conn is None: release_conn = response_kw.get("preload_content", True) # Check host if assert_same_host and not self.is_same_host(url): raise HostChangedError(self, url, retries) # Ensure that the URL we're connecting to is properly encoded if url.startswith("/"): url = six.ensure_str(_encode_target(url)) else: url = six.ensure_str(parsed_url.url) conn = None # Track whether `conn` needs to be released before # returning/raising/recursing. Update this variable if necessary, and # leave `release_conn` constant throughout the function. That way, if # the function recurses, the original value of `release_conn` will be # passed down into the recursive call, and its value will be respected. # # See issue #651 [1] for details. # # [1] <https://github.com/urllib3/urllib3/issues/651> release_this_conn = release_conn http_tunnel_required = connection_requires_http_tunnel( self.proxy, self.proxy_config, destination_scheme ) # Merge the proxy headers. Only done when not using HTTP CONNECT. We # have to copy the headers dict so we can safely change it without those # changes being reflected in anyone else's copy. if not http_tunnel_required: headers = headers.copy() headers.update(self.proxy_headers) # Must keep the exception bound to a separate variable or else Python 3 # complains about UnboundLocalError. err = None # Keep track of whether we cleanly exited the except block. This # ensures we do proper cleanup in finally. clean_exit = False # Rewind body position, if needed. Record current position # for future rewinds in the event of a redirect/retry. body_pos = set_file_position(body, body_pos) try: # Request a connection from the queue. timeout_obj = self._get_timeout(timeout) conn = self._get_conn(timeout=pool_timeout) conn.timeout = timeout_obj.connect_timeout is_new_proxy_conn = self.proxy is not None and not getattr( conn, "sock", None ) if is_new_proxy_conn and http_tunnel_required: self._prepare_proxy(conn) # Make the request on the httplib connection object. httplib_response = self._make_request( conn, method, url, timeout=timeout_obj, body=body, headers=headers, chunked=chunked, ) # If we're going to release the connection in ``finally:``, then # the response doesn't need to know about the connection. Otherwise # it will also try to release it and we'll have a double-release # mess. response_conn = conn if not release_conn else None # Pass method to Response for length checking response_kw["request_method"] = method # Import httplib's response into our own wrapper object response = self.ResponseCls.from_httplib( httplib_response, pool=self, connection=response_conn, retries=retries, **response_kw ) # Everything went great! clean_exit = True except EmptyPoolError: # Didn't get a connection from the pool, no need to clean up clean_exit = True release_this_conn = False raise except ( TimeoutError, HTTPException, SocketError, ProtocolError, BaseSSLError, SSLError, CertificateError, ) as e: # Discard the connection for these exceptions. It will be # replaced during the next _get_conn() call. clean_exit = False if isinstance(e, (BaseSSLError, CertificateError)): e = SSLError(e) elif isinstance(e, (SocketError, NewConnectionError)) and self.proxy: e = ProxyError("Cannot connect to proxy.", e) elif isinstance(e, (SocketError, HTTPException)): e = ProtocolError("Connection aborted.", e) retries = retries.increment( method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] ) retries.sleep() # Keep track of the error for the retry warning. err = e finally: if not clean_exit: # We hit some kind of exception, handled or otherwise. We need # to throw the connection away unless explicitly told not to. # Close the connection, set the variable to None, and make sure # we put the None back in the pool to avoid leaking it. conn = conn and conn.close() release_this_conn = True if release_this_conn: # Put the connection back to be reused. If the connection is # expired then it will be None, which will get replaced with a # fresh connection during _get_conn. self._put_conn(conn) if not conn: # Try again log.warning( "Retrying (%r) after connection broken by '%r': %s", retries, err, url ) return self.urlopen( method, url, body, headers, retries, redirect, assert_same_host, timeout=timeout, pool_timeout=pool_timeout, release_conn=release_conn, chunked=chunked, body_pos=body_pos, > **response_kw ) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:796: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' body = None headers = {'User-Agent': 'python-requests/2.25.1', 'Accept-Encoding': 'gzip, deflate', 'Accept': '*/*', 'Connection': 'keep-alive'} retries = Retry(total=0, connect=None, read=None, redirect=None, status=None) redirect = False, assert_same_host = False timeout = Timeout(connect=None, read=None, total=None), pool_timeout = None release_conn = False, chunked = False, body_pos = None response_kw = {'decode_content': False, 'preload_content': False} parsed_url = Url(scheme=None, auth=None, host=None, port=None, path='/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021', query='edges=%2A&direction=forward', fragment=None) destination_scheme = None, conn = None, release_this_conn = True http_tunnel_required = False, err = None, clean_exit = False def urlopen( self, method, url, body=None, headers=None, retries=None, redirect=True, assert_same_host=True, timeout=_Default, pool_timeout=None, release_conn=None, chunked=False, body_pos=None, **response_kw ): """ Get a connection from the pool and perform an HTTP request. This is the lowest level call for making a request, so you'll need to specify all the raw details. .. note:: More commonly, it's appropriate to use a convenience method provided by :class:`.RequestMethods`, such as :meth:`request`. .. note:: `release_conn` will only behave as expected if `preload_content=False` because we want to make `preload_content=False` the default behaviour someday soon without breaking backwards compatibility. :param method: HTTP request method (such as GET, POST, PUT, etc.) :param url: The URL to perform the request on. :param body: Data to send in the request body, either :class:`str`, :class:`bytes`, an iterable of :class:`str`/:class:`bytes`, or a file-like object. :param headers: Dictionary of custom headers to send, such as User-Agent, If-None-Match, etc. If None, pool headers are used. If provided, these headers completely replace any pool-specific headers. :param retries: Configure the number of retries to allow before raising a :class:`~urllib3.exceptions.MaxRetryError` exception. Pass ``None`` to retry until you receive a response. Pass a :class:`~urllib3.util.retry.Retry` object for fine-grained control over different types of retries. Pass an integer number to retry connection errors that many times, but no other types of errors. Pass zero to never retry. If ``False``, then retries are disabled and any exception is raised immediately. Also, instead of raising a MaxRetryError on redirects, the redirect response will be returned. :type retries: :class:`~urllib3.util.retry.Retry`, False, or an int. :param redirect: If True, automatically handle redirects (status codes 301, 302, 303, 307, 308). Each redirect counts as a retry. Disabling retries will disable redirect, too. :param assert_same_host: If ``True``, will make sure that the host of the pool requests is consistent else will raise HostChangedError. When ``False``, you can use the pool on an HTTP proxy and request foreign hosts. :param timeout: If specified, overrides the default timeout for this one request. It may be a float (in seconds) or an instance of :class:`urllib3.util.Timeout`. :param pool_timeout: If set and the pool is set to block=True, then this method will block for ``pool_timeout`` seconds and raise EmptyPoolError if no connection is available within the time period. :param release_conn: If False, then the urlopen call will not release the connection back into the pool once a response is received (but will release if you read the entire contents of the response such as when `preload_content=True`). This is useful if you're not preloading the response's content immediately. You will need to call ``r.release_conn()`` on the response ``r`` to return the connection back into the pool. If None, it takes the value of ``response_kw.get('preload_content', True)``. :param chunked: If True, urllib3 will send the body using chunked transfer encoding. Otherwise, urllib3 will send the body using the standard content-length form. Defaults to False. :param int body_pos: Position to seek to in file-like body in the event of a retry or redirect. Typically this won't need to be set because urllib3 will auto-populate the value when needed. :param \\**response_kw: Additional parameters are passed to :meth:`urllib3.response.HTTPResponse.from_httplib` """ parsed_url = parse_url(url) destination_scheme = parsed_url.scheme if headers is None: headers = self.headers if not isinstance(retries, Retry): retries = Retry.from_int(retries, redirect=redirect, default=self.retries) if release_conn is None: release_conn = response_kw.get("preload_content", True) # Check host if assert_same_host and not self.is_same_host(url): raise HostChangedError(self, url, retries) # Ensure that the URL we're connecting to is properly encoded if url.startswith("/"): url = six.ensure_str(_encode_target(url)) else: url = six.ensure_str(parsed_url.url) conn = None # Track whether `conn` needs to be released before # returning/raising/recursing. Update this variable if necessary, and # leave `release_conn` constant throughout the function. That way, if # the function recurses, the original value of `release_conn` will be # passed down into the recursive call, and its value will be respected. # # See issue #651 [1] for details. # # [1] <https://github.com/urllib3/urllib3/issues/651> release_this_conn = release_conn http_tunnel_required = connection_requires_http_tunnel( self.proxy, self.proxy_config, destination_scheme ) # Merge the proxy headers. Only done when not using HTTP CONNECT. We # have to copy the headers dict so we can safely change it without those # changes being reflected in anyone else's copy. if not http_tunnel_required: headers = headers.copy() headers.update(self.proxy_headers) # Must keep the exception bound to a separate variable or else Python 3 # complains about UnboundLocalError. err = None # Keep track of whether we cleanly exited the except block. This # ensures we do proper cleanup in finally. clean_exit = False # Rewind body position, if needed. Record current position # for future rewinds in the event of a redirect/retry. body_pos = set_file_position(body, body_pos) try: # Request a connection from the queue. timeout_obj = self._get_timeout(timeout) conn = self._get_conn(timeout=pool_timeout) conn.timeout = timeout_obj.connect_timeout is_new_proxy_conn = self.proxy is not None and not getattr( conn, "sock", None ) if is_new_proxy_conn and http_tunnel_required: self._prepare_proxy(conn) # Make the request on the httplib connection object. httplib_response = self._make_request( conn, method, url, timeout=timeout_obj, body=body, headers=headers, chunked=chunked, ) # If we're going to release the connection in ``finally:``, then # the response doesn't need to know about the connection. Otherwise # it will also try to release it and we'll have a double-release # mess. response_conn = conn if not release_conn else None # Pass method to Response for length checking response_kw["request_method"] = method # Import httplib's response into our own wrapper object response = self.ResponseCls.from_httplib( httplib_response, pool=self, connection=response_conn, retries=retries, **response_kw ) # Everything went great! clean_exit = True except EmptyPoolError: # Didn't get a connection from the pool, no need to clean up clean_exit = True release_this_conn = False raise except ( TimeoutError, HTTPException, SocketError, ProtocolError, BaseSSLError, SSLError, CertificateError, ) as e: # Discard the connection for these exceptions. It will be # replaced during the next _get_conn() call. clean_exit = False if isinstance(e, (BaseSSLError, CertificateError)): e = SSLError(e) elif isinstance(e, (SocketError, NewConnectionError)) and self.proxy: e = ProxyError("Cannot connect to proxy.", e) elif isinstance(e, (SocketError, HTTPException)): e = ProtocolError("Connection aborted.", e) retries = retries.increment( > method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] ) .tox/py3/lib/python3.7/site-packages/urllib3/connectionpool.py:756: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = Retry(total=0, connect=None, read=None, redirect=None, status=None) method = 'GET' url = '/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward' response = None error = ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response')) _pool = <urllib3.connectionpool.HTTPConnectionPool object at 0x7efcd6d89f98> _stacktrace = <traceback object at 0x7efcd6e48588> def increment( self, method=None, url=None, response=None, error=None, _pool=None, _stacktrace=None, ): """Return a new Retry object with incremented retry counters. :param response: A response object, or None, if the server did not return a response. :type response: :class:`~urllib3.response.HTTPResponse` :param Exception error: An error encountered during the request, or None if the response was received successfully. :return: A new ``Retry`` object. """ if self.total is False and error: # Disabled, indicate to re-raise the error. raise six.reraise(type(error), error, _stacktrace) total = self.total if total is not None: total -= 1 connect = self.connect read = self.read redirect = self.redirect status_count = self.status other = self.other cause = "unknown" status = None redirect_location = None if error and self._is_connection_error(error): # Connect retry? if connect is False: raise six.reraise(type(error), error, _stacktrace) elif connect is not None: connect -= 1 elif error and self._is_read_error(error): # Read retry? if read is False or not self._is_method_retryable(method): raise six.reraise(type(error), error, _stacktrace) elif read is not None: read -= 1 elif error: # Other retry? if other is not None: other -= 1 elif response and response.get_redirect_location(): # Redirect retry? if redirect is not None: redirect -= 1 cause = "too many redirects" redirect_location = response.get_redirect_location() status = response.status else: # Incrementing because of a server error like a 500 in # status_forcelist and the given method is in the allowed_methods cause = ResponseError.GENERIC_ERROR if response and response.status: if status_count is not None: status_count -= 1 cause = ResponseError.SPECIFIC_ERROR.format(status_code=response.status) status = response.status history = self.history + ( RequestHistory(method, url, error, status, redirect_location), ) new_retry = self.new( total=total, connect=connect, read=read, redirect=redirect, status=status_count, other=other, history=history, ) if new_retry.is_exhausted(): > raise MaxRetryError(_pool, url, error or ResponseError(cause)) E urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='127.0.0.1', port=43451): Max retries exceeded with url: /graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward (Caused by ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))) .tox/py3/lib/python3.7/site-packages/urllib3/util/retry.py:573: MaxRetryError During handling of the above exception, another exception occurred: self = <RemoteGraphClient url=http://127.0.0.1:43451/graph/>, verb = 'get' endpoint = 'leaves/swh:1:ori:fff0000000000000000000000000000000000021' opts = {'params': {'direction': 'forward', 'edges': '*'}, 'stream': True} def raw_verb(self, verb, endpoint, **opts): if "chunk_size" in opts: # if the chunk_size argument has been passed, consider the user # also wants stream=True, otherwise, what's the point. opts["stream"] = True if self.timeout and "timeout" not in opts: opts["timeout"] = self.timeout try: > return getattr(self.session, verb)(self._url(endpoint), **opts) .tox/py3/lib/python3.7/site-packages/swh/core/api/__init__.py:254: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <requests.sessions.Session object at 0x7efcd6d89cc0> url = 'http://127.0.0.1:43451/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021' kwargs = {'allow_redirects': True, 'params': {'direction': 'forward', 'edges': '*'}, 'stream': True} def get(self, url, **kwargs): r"""Sends a GET request. Returns :class:`Response` object. :param url: URL for the new :class:`Request` object. :param \*\*kwargs: Optional arguments that ``request`` takes. :rtype: requests.Response """ kwargs.setdefault('allow_redirects', True) > return self.request('GET', url, **kwargs) .tox/py3/lib/python3.7/site-packages/requests/sessions.py:555: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <requests.sessions.Session object at 0x7efcd6d89cc0>, method = 'GET' url = 'http://127.0.0.1:43451/graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021' params = {'direction': 'forward', 'edges': '*'}, data = None, headers = None cookies = None, files = None, auth = None, timeout = None allow_redirects = True, proxies = {}, hooks = None, stream = True, verify = None cert = None, json = None def request(self, method, url, params=None, data=None, headers=None, cookies=None, files=None, auth=None, timeout=None, allow_redirects=True, proxies=None, hooks=None, stream=None, verify=None, cert=None, json=None): """Constructs a :class:`Request <Request>`, prepares it and sends it. Returns :class:`Response <Response>` object. :param method: method for the new :class:`Request` object. :param url: URL for the new :class:`Request` object. :param params: (optional) Dictionary or bytes to be sent in the query string for the :class:`Request`. :param data: (optional) Dictionary, list of tuples, bytes, or file-like object to send in the body of the :class:`Request`. :param json: (optional) json to send in the body of the :class:`Request`. :param headers: (optional) Dictionary of HTTP Headers to send with the :class:`Request`. :param cookies: (optional) Dict or CookieJar object to send with the :class:`Request`. :param files: (optional) Dictionary of ``'filename': file-like-objects`` for multipart encoding upload. :param auth: (optional) Auth tuple or callable to enable Basic/Digest/Custom HTTP Auth. :param timeout: (optional) How long to wait for the server to send data before giving up, as a float, or a :ref:`(connect timeout, read timeout) <timeouts>` tuple. :type timeout: float or tuple :param allow_redirects: (optional) Set to True by default. :type allow_redirects: bool :param proxies: (optional) Dictionary mapping protocol or protocol and hostname to the URL of the proxy. :param stream: (optional) whether to immediately download the response content. Defaults to ``False``. :param verify: (optional) Either a boolean, in which case it controls whether we verify the server's TLS certificate, or a string, in which case it must be a path to a CA bundle to use. Defaults to ``True``. When set to ``False``, requests will accept any TLS certificate presented by the server, and will ignore hostname mismatches and/or expired certificates, which will make your application vulnerable to man-in-the-middle (MitM) attacks. Setting verify to ``False`` may be useful during local development or testing. :param cert: (optional) if String, path to ssl client cert file (.pem). If Tuple, ('cert', 'key') pair. :rtype: requests.Response """ # Create the Request. req = Request( method=method.upper(), url=url, headers=headers, files=files, data=data or {}, json=json, params=params or {}, auth=auth, cookies=cookies, hooks=hooks, ) prep = self.prepare_request(req) proxies = proxies or {} settings = self.merge_environment_settings( prep.url, proxies, stream, verify, cert ) # Send the request. send_kwargs = { 'timeout': timeout, 'allow_redirects': allow_redirects, } send_kwargs.update(settings) > resp = self.send(prep, **send_kwargs) .tox/py3/lib/python3.7/site-packages/requests/sessions.py:542: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <requests.sessions.Session object at 0x7efcd6d89cc0> request = <PreparedRequest [GET]> kwargs = {'cert': None, 'proxies': OrderedDict(), 'stream': True, 'timeout': None, ...} allow_redirects = True, stream = True, hooks = {'response': []} adapter = <requests.adapters.HTTPAdapter object at 0x7efcd6d89f60> start = 1610119798.89065 def send(self, request, **kwargs): """Send a given PreparedRequest. :rtype: requests.Response """ # Set defaults that the hooks can utilize to ensure they always have # the correct parameters to reproduce the previous request. kwargs.setdefault('stream', self.stream) kwargs.setdefault('verify', self.verify) kwargs.setdefault('cert', self.cert) kwargs.setdefault('proxies', self.proxies) # It's possible that users might accidentally send a Request object. # Guard against that specific failure case. if isinstance(request, Request): raise ValueError('You can only send PreparedRequests.') # Set up variables needed for resolve_redirects and dispatching of hooks allow_redirects = kwargs.pop('allow_redirects', True) stream = kwargs.get('stream') hooks = request.hooks # Get the appropriate adapter to use adapter = self.get_adapter(url=request.url) # Start time (approximately) of the request start = preferred_clock() # Send the request > r = adapter.send(request, **kwargs) .tox/py3/lib/python3.7/site-packages/requests/sessions.py:655: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <requests.adapters.HTTPAdapter object at 0x7efcd6d89f60> request = <PreparedRequest [GET]>, stream = True timeout = Timeout(connect=None, read=None, total=None), verify = True cert = None, proxies = OrderedDict() def send(self, request, stream=False, timeout=None, verify=True, cert=None, proxies=None): """Sends PreparedRequest object. Returns Response object. :param request: The :class:`PreparedRequest <PreparedRequest>` being sent. :param stream: (optional) Whether to stream the request content. :param timeout: (optional) How long to wait for the server to send data before giving up, as a float, or a :ref:`(connect timeout, read timeout) <timeouts>` tuple. :type timeout: float or tuple or urllib3 Timeout object :param verify: (optional) Either a boolean, in which case it controls whether we verify the server's TLS certificate, or a string, in which case it must be a path to a CA bundle to use :param cert: (optional) Any user-provided SSL certificate to be trusted. :param proxies: (optional) The proxies dictionary to apply to the request. :rtype: requests.Response """ try: conn = self.get_connection(request.url, proxies) except LocationValueError as e: raise InvalidURL(e, request=request) self.cert_verify(conn, request.url, verify, cert) url = self.request_url(request, proxies) self.add_headers(request, stream=stream, timeout=timeout, verify=verify, cert=cert, proxies=proxies) chunked = not (request.body is None or 'Content-Length' in request.headers) if isinstance(timeout, tuple): try: connect, read = timeout timeout = TimeoutSauce(connect=connect, read=read) except ValueError as e: # this may raise a string formatting error. err = ("Invalid timeout {}. Pass a (connect, read) " "timeout tuple, or a single float to set " "both timeouts to the same value".format(timeout)) raise ValueError(err) elif isinstance(timeout, TimeoutSauce): pass else: timeout = TimeoutSauce(connect=timeout, read=timeout) try: if not chunked: resp = conn.urlopen( method=request.method, url=url, body=request.body, headers=request.headers, redirect=False, assert_same_host=False, preload_content=False, decode_content=False, retries=self.max_retries, timeout=timeout ) # Send the request. else: if hasattr(conn, 'proxy_pool'): conn = conn.proxy_pool low_conn = conn._get_conn(timeout=DEFAULT_POOL_TIMEOUT) try: low_conn.putrequest(request.method, url, skip_accept_encoding=True) for header, value in request.headers.items(): low_conn.putheader(header, value) low_conn.endheaders() for i in request.body: low_conn.send(hex(len(i))[2:].encode('utf-8')) low_conn.send(b'\r\n') low_conn.send(i) low_conn.send(b'\r\n') low_conn.send(b'0\r\n\r\n') # Receive the response from the server try: # For Python 2.7, use buffering of HTTP responses r = low_conn.getresponse(buffering=True) except TypeError: # For compatibility with Python 3.3+ r = low_conn.getresponse() resp = HTTPResponse.from_httplib( r, pool=conn, connection=low_conn, preload_content=False, decode_content=False ) except: # If we hit any problems here, clean up the connection. # Then, reraise so that we can handle the actual exception. low_conn.close() raise except (ProtocolError, socket.error) as err: raise ConnectionError(err, request=request) except MaxRetryError as e: if isinstance(e.reason, ConnectTimeoutError): # TODO: Remove this in 3.0.0: see #2811 if not isinstance(e.reason, NewConnectionError): raise ConnectTimeout(e, request=request) if isinstance(e.reason, ResponseError): raise RetryError(e, request=request) if isinstance(e.reason, _ProxyError): raise ProxyError(e, request=request) if isinstance(e.reason, _SSLError): # This branch is for urllib3 v1.22 and later. raise SSLError(e, request=request) > raise ConnectionError(e, request=request) E requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=43451): Max retries exceeded with url: /graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward (Caused by ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))) .tox/py3/lib/python3.7/site-packages/requests/adapters.py:516: ConnectionError During handling of the above exception, another exception occurred: graph_client = <RemoteGraphClient url=http://127.0.0.1:43451/graph/> def test_param_validation(graph_client): with raises(RemoteException) as exc_info: # SWHID not found > list(graph_client.leaves("swh:1:ori:fff0000000000000000000000000000000000021")) .tox/py3/lib/python3.7/site-packages/swh/graph/tests/test_api_client.py:260: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ .tox/py3/lib/python3.7/site-packages/swh/graph/client.py:31: in get_lines yield from self.raw_verb_lines("get", endpoint, **kwargs) .tox/py3/lib/python3.7/site-packages/swh/graph/client.py:25: in raw_verb_lines response = self.raw_verb(verb, endpoint, stream=True, **kwargs) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <RemoteGraphClient url=http://127.0.0.1:43451/graph/>, verb = 'get' endpoint = 'leaves/swh:1:ori:fff0000000000000000000000000000000000021' opts = {'params': {'direction': 'forward', 'edges': '*'}, 'stream': True} def raw_verb(self, verb, endpoint, **opts): if "chunk_size" in opts: # if the chunk_size argument has been passed, consider the user # also wants stream=True, otherwise, what's the point. opts["stream"] = True if self.timeout and "timeout" not in opts: opts["timeout"] = self.timeout try: return getattr(self.session, verb)(self._url(endpoint), **opts) except requests.exceptions.ConnectionError as e: > raise self.api_exception(e) E swh.graph.client.GraphAPIError: An unexpected error occurred in the Graph backend: (ConnectionError(MaxRetryError("HTTPConnectionPool(host='127.0.0.1', port=43451): Max retries exceeded with url: /graph/leaves/swh:1:ori:fff0000000000000000000000000000000000021?edges=%2A&direction=forward (Caused by ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response')))")),) .tox/py3/lib/python3.7/site-packages/swh/core/api/__init__.py:256: GraphAPIError