Page MenuHomeSoftware Heritage
Files F9340315

pool.conf.erb
No OneTemporary
Actions

pool.conf.erb
View Options

[<%= @pool %>]
; The address on which to accept FastCGI requests.
listen = <%= @listen %>
; Set listen(2) backlog. A value of '-1' means unlimited.
listen.backlog = <%= @listen_backlog %>
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
<% if @listen_allowed_clients -%>
listen.allowed_clients = <%= @listen_allowed_clients %>
<% else -%>
;listen.allowed_clients = 127.0.0.1
<% end -%>
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0666
<% if @listen_owner -%>
listen.owner = <%= @listen_owner %>
<% else -%>
;listen.owner = nobody
<% end -%>
<% if @listen_group -%>
listen.group = <%= @listen_group %>
<% else -%>
;listen.group = nobody
<% end -%>
<% if @listen_mode -%>
listen.mode = <%= @listen_mode %>
<% else -%>
;listen.mode = 0660
<% end -%>
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
; RPM: apache Choosed to be able to access some dir as httpd
user = <%= @user %>
; RPM: Keep a group allowed to write in log dir.
group = <%= @group_final %>
<% if @apparmor_hat -%>
; Apparmor hat to change to
apparmor_hat = <%= @apparmor_hat %>
<% end -%>
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives:
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; ondemand - no children are created at startup. Children will be forked when
; new requests will connect. The following parameter are used:
; pm.max_children - the maximum number of children that
; can be alive at the same time.
; pm.process_idle_timeout - The number of seconds after which
; an idle process will be killed.
; Note: This value is mandatory.
pm = <%= @pm %>
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes to be created when pm is set to 'dynamic'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI.
; Note: Used when pm is set to either 'static' or 'dynamic'
; Note: This value is mandatory.
pm.max_children = <%= @pm_max_children %>
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = <%= @pm_start_servers %>
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = <%= @pm_min_spare_servers %>
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = <%= @pm_max_spare_servers %>
; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
pm.process_idle_timeout = <%= @pm_process_idle_timeout %>
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = <%= @pm_max_requests %>
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. By default, the status page shows the following
; information:
; accepted conn - the number of request accepted by the pool;
; pool - the name of the pool;
; process manager - static or dynamic;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes.
; The values of 'idle processes', 'active processes' and 'total processes' are
; updated each second. The value of 'accepted conn' is updated in real time.
; Example output:
; accepted conn: 12073
; pool: www
; process manager: static
; idle processes: 35
; active processes: 65
; total processes: 100
; By default the status page output is formatted as text/plain. Passing either
; 'html' or 'json' as a query string will return the corresponding output
; syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
<% if @pm_status_path -%>
pm.status_path = <%= @pm_status_path %>
<% else -%>
;pm.status_path = /status
<% end -%>
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
<% if @ping_path -%>
ping.path = <%= @ping_path %>
<% else -%>
;ping.path = /ping
<% end -%>
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
ping.response = <%= @ping_response %>
; The access log file
; Default: not set
<% if @access_log -%>
access.log = <%= @access_log %>
<% end -%>
; The access log format.
; The following syntax is allowed
; %%: the '%' character
; %C: %CPU used by the request
; it can accept the following format:
; - %{user}C for user CPU only
; - %{system}C for system CPU only
; - %{total}C for user + system CPU (default)
; %d: time taken to serve the request
; it can accept the following format:
; - %{seconds}d (default)
; - %{miliseconds}d
; - %{mili}d
; - %{microseconds}d
; - %{micro}d
; %e: an environment variable (same as $_ENV or $_SERVER)
; it must be associated with embraces to specify the name of the env
; variable. Some exemples:
; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
; %f: script filename
; %l: content-length of the request (for POST request only)
; %m: request method
; %M: peak of memory allocated by PHP
; it can accept the following format:
; - %{bytes}M (default)
; - %{kilobytes}M
; - %{kilo}M
; - %{megabytes}M
; - %{mega}M
; %n: pool name
; %o: ouput header
; it must be associated with embraces to specify the name of the header:
; - %{Content-Type}o
; - %{X-Powered-By}o
; - %{Transfert-Encoding}o
; - ....
; %p: PID of the child that serviced the request
; %P: PID of the parent of the child that serviced the request
; %q: the query string
; %Q: the '?' character if query string exists
; %r: the request URI (without the query string, see %q and %Q)
; %R: remote IP address
; %s: status (response code)
; %t: server time the request was received
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %T: time the log has been written (the request has finished)
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
access.format = <%= @access_log_format %>
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_terminate_timeout = <%= @request_terminate_timeout %>
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_slowlog_timeout = <%= @request_slowlog_timeout %>
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = <%= @slowlog %>
; Set open file descriptor rlimit.
; Default Value: system defined value
<% if @rlimit_files -%>
rlimit_files = <%= @rlimit_files %>
<% else -%>
;rlimit_files = 1024
<% end -%>
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
<% if @rlimit_core -%>
rlimit_core = <%= @rlimit_core %>
<% else -%>
;rlimit_core = 0
<% end -%>
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
<% if @chroot -%>
chroot = <%= @chroot %>
<% else -%>
;chroot =
<% end -%>
; Chdir to this directory at the start. This value must be an absolute path.
; Default Value: current directory or / when chroot
<% if @chdir -%>
chdir = <%= @chdir %>
<% else -%>
;chdir = /var/www
<% end -%>
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Default Value: no
catch_workers_output = <%= @catch_workers_output %>
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
; - the global prefix if it's been set (-p arguement)
; - /usr otherwise
<% if @include -%>
include=<%= @include %>
<% else -%>
;include=/etc/php5/fpm/*.conf
<% end -%>
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
<% if @clear_env -%>
<% @env.each do |var| -%>
env[<%= var %>] = $<%= var %>
<% end -%>
<% @env_value.sort_by {|key,value| key}.each do |key,value| -%>
<% if !value.empty? -%>
env[<%= key %>] = '<%= value %>'
<% end -%>
<% end -%>
<% else -%>
clear_env = no
<% end -%>
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/php-fpm/www-error.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
;
; Custom PHP values
;
<% @php_value.sort_by {|key,value| key}.each do |key,value| -%>
php_value[<%= key %>] = <%= value %>
<% end -%>
;
; Custom PHP flags
;
<% @php_flag.sort_by {|key,flag| key}.each do |key,flag| -%>
php_flag[<%= key %>] = <%= flag %>
<% end -%>
;
; Custom PHP admin values
;
<% @php_admin_value.sort_by {|key,value| key}.each do |key,value| -%>
php_admin_value[<%= key %>] = <%= value %>
<% end -%>
;
; Custom PHP admin flags
;
<% @php_admin_flag.sort_by {|key,flag| key}.each do |key,flag| -%>
php_admin_flag[<%= key %>] = <%= flag %>
<% end -%>
;
; Custom PHP directives
;
<% @php_directives.each do |line| -%>
<%= line.gsub "{", "%{" %>
<% end -%>
<% if @security_limit_extensions -%>
security.limit_extensions = <%= @security_limit_extensions.join(" ") %>
<% end -%>

File Metadata

Mime Type
text/plain
Expires
Jul 4 2025, 10:32 AM (4 w, 4 d ago)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3407573

Event Timeline

About · Developer information · Legal