Page MenuHomeSoftware Heritage
Files F9340782

No OneTemporary
Actions

View Options

diff --git a/README.md b/README.md
index cbbcfe2..fa9b2ea 100644
--- a/README.md
+++ b/README.md
@@ -1,679 +1,679 @@
# swh-docker-dev
This repo contains Dockerfiles to allow developers to run a small
Software Heritage instance on their development computer.
The end goal is to smooth the contributors/developers workflow. Focus
on coding, not configuring!
WARNING: Running a Software Heritage instance on your machine can consume
quite a bit of resources: if you play a bit too hard (e.g., if you
try to list all GitHub repositories with the corresponding lister),
you may fill your hard drive, and consume a lot of CPU, memory and
network bandwidth.
## Dependencies
This uses docker with docker-compose, so ensure you have a working
docker environment and docker-compose is installed.
We recommend using the latest version of docker, so please read
https://docs.docker.com/install/linux/docker-ce/debian/ for more details on how
to install docker on your machine.
On a debian system, docker-compose can be installed from debian repositories.
On a stable (stretch) machine, it is recommended to install the version from
[backports](https://backports.debian.org/Instructions/):
```
~$ sudo apt install -t stretch-backports docker-compose
```
## Quick start
First, clone this repository.
If you already have followed the
[[https://docs.softwareheritage.org/devel/developer-setup.html|developer setup guide]],
then you should already have a copy of the swh-docker-env git repository. Use
it:
```
~$ cd swh-environment/swh-docker-dev
```
Otherwise, we suggest to create a `swh-environment`
directory in which this repo will be cloned so you can later on run some
component in docker containers with overrides code from local repositories (see
[[<#using-docker-setup-development-and-integration-testing>|below]]):
```
~$ mkdir swh-environment
~$ cd swh-environment
~/swh-environment$ git clone https://forge.softwareheritage.org/source/swh-docker-dev.git
~/swh-environment$ cd swh-docker-dev
```
Then, start containers:
```
~/swh-environment/swh-docker-dev$ docker-compose up -d
[...]
Creating swh-docker-dev_amqp_1 ... done
Creating swh-docker-dev_zookeeper_1 ... done
Creating swh-docker-dev_kafka_1 ... done
Creating swh-docker-dev_flower_1 ... done
Creating swh-docker-dev_swh-scheduler-db_1 ... done
[...]
```
This will build docker images and run them.
Check everything is running fine with:
```
~/swh-environment/swh-docker-dev$ docker-compose ps
Name Command State Ports
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
swh-docker-dev_amqp_1 docker-entrypoint.sh rabbi ... Up 15671/tcp, 0.0.0.0:5018->15672/tcp, 25672/tcp, 4369/tcp, 5671/tcp, 5672/tcp
swh-docker-dev_flower_1 flower --broker=amqp://gue ... Up 0.0.0.0:5555->5555/tcp
swh-docker-dev_kafka_1 start-kafka.sh Up 0.0.0.0:9092->9092/tcp
swh-docker-dev_swh-deposit-db_1 docker-entrypoint.sh postgres Up 5432/tcp
swh-docker-dev_swh-deposit_1 /entrypoint.sh Up 0.0.0.0:5006->5006/tcp
[...]
```
At the time of writing this guide, the startup of some containers may fail the
first time for dependency-related problems. If some containers failed to start,
just run the `docker-compose up -d` command again.
If a container really refuses to start properly, you can check why using the
`docker-compose logs` command. For example:
```
~/swh-environment/swh-docker-dev$ docker-compose logs swh-lister
Attaching to swh-docker-dev_swh-lister_1
[...]
swh-lister_1 | Processing /src/swh-scheduler
swh-lister_1 | Could not install packages due to an EnvironmentError: [('/src/swh-scheduler/.hypothesis/unicodedata/8.0.0/charmap.json.gz', '/tmp/pip-req-build-pm7nsax3/.hypothesis/unicodedata/8.0.0/charmap.json.gz', "[Errno 13] Permission denied: '/src/swh-scheduler/.hypothesis/unicodedata/8.0.0/charmap.json.gz'")]
swh-lister_1 |
```
Once all containers are running, you can use the web interface by opening
http://localhost:5080/ in your web browser.
At this point, the archive is empty and needs to be filled with some content.
To do so, you can create tasks that will scrape a forge. For example, to inject
the code from the https://0xacab.org gitlab forge:
```
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
swh scheduler task add list-gitlab-full \
-p oneshot api_baseurl=https://0xacab.org/api/v4
Created 1 tasks
Task 1
Next run: just now (2018-12-19 14:58:49+00:00)
Interval: 90 days, 0:00:00
Type: list-gitlab-full
Policy: oneshot
Args:
Keyword args:
api_baseurl=https://0xacab.org/api/v4
```
This task will scrape the forge's project list and create subtasks to inject
each git repository found there.
This will take a bit af time to complete.
To increase the speed at which git repositories are imported, you can spawn more
`swh-loader-git` workers:
```
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
celery status
listers@50ac2185c6c9: OK
loader@b164f9055637: OK
indexer@33bc6067a5b8: OK
vault@c9fef1bbfdc1: OK
4 nodes online.
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
celery control pool_grow 3 -d loader@b164f9055637
-> loader@b164f9055637: OK
pool will grow
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
celery inspect -d loader@b164f9055637 stats | grep prefetch_count
"prefetch_count": 4
```
Now there are 4 workers ingesting git repositories.
You can also increase the number of `swh-loader-git` containers:
```
~/swh-environment/swh-docker-dev$ docker-compose up -d --scale swh-loader=4
[...]
Creating swh-docker-dev_swh-loader_2 ... done
Creating swh-docker-dev_swh-loader_3 ... done
Creating swh-docker-dev_swh-loader_4 ... done
```
## Updating the docker image
All containers started by `docker-compose` are bound to a docker image
named `swh/stack` including all the software components of Software Heritage.
When new versions of these components are released, the docker image will not
be automatically updated. In order to update all Software heritage components
to their latest version, the docker image needs to be explicitly rebuilt by
issuing the following command inside the `swh-docker-dev` directory:
```
~/swh-environment/swh-docker-dev$ docker build --no-cache -t swh/stack .
```
## Details
This runs the following services on their respectively standard ports,
all of the following services are configured to communicate with each
other:
- swh-storage-db: a `softwareheritage` instance db that stores the
Merkle DAG,
- swh-objstorage: Content-addressable object storage,
- swh-storage: Abstraction layer over the archive, allowing to access
all stored source code artifacts as well as their metadata,
- swh-web: the swh's web interface over the storage,
- swh-scheduler: the API service as well as 2 utilities,
the runner and the listener,
- swh-lister: celery workers dedicated to running lister tasks,
- swh-loaders: celery workers dedicated to importing/updating source code
content (VCS repos, source packages, etc.),
- swh-journal: Persistent logger of changes to the archive, with
publish-subscribe support.
That means, you can start doing the ingestion using those services using the
same setup described in the getting-started starting directly at
https://docs.softwareheritage.org/devel/getting-started.html#step-4-ingest-repositories
### Exposed Ports
Several services have their listening ports exposed on the host:
- amqp: 5072
- kafka: 5092
- nginx: 5080
And for SWH services:
- scheduler API: 5008
- storage API: 5002
- object storage API: 5003
- indexer API: 5007
- web app: 5004
- deposit app: 5006
Beware that these ports are not the same as the ports used from within the
docker network. This means that the same command executed from the host or from
a docker container will not use the same urls to access services. For example,
to use the `celery` utility from the host, you may type:
```
~/swh-environment/swh-docker-dev$ CELERY_BROKER_URL=amqp://:5072// celery status
loader@61704103668c: OK
[...]
```
To run the same command from within a container:
```
~/swh-environment/swh-docker-dev$ celery-compose exec swh-scheduler-api celery status
loader@61704103668c: OK
[...]
```
## Managing tasks
One of the main components of the Software Heritage platform is the task system.
These are used to manage everything related to background process, like
discovering new git repositories to import, ingesting them, checking a known
repository is up to date, etc.
The task system is based on Celery but uses a custom database-based scheduler.
So when we refer to the term 'task', it may designate either a Celery task or a
SWH one (ie. the entity in the database). When we refer to simply a "task" in
the documentation, it designates the SWH task.
When a SWH task is ready to be executed, a Celery task is created to handle the
actual SWH task's job. Note that not all Celery tasks are directly linked to a
SWH task (some SWH tasks are implemented using a Celery task that spawns Celery
subtasks).
A (SWH) task can be `recurring` or `oneshot`. `oneshot` tasks are only executed
once, whereas `recurring` are regularly executed. The scheduling configuration
of these recurring tasks can be set via the fields `current_interval` and
`priority` (can be 'high', 'normal' or 'low') of the task database entity.
### Inserting a new lister task
To list the content of a source code provider like github or a Debian
distribution, you may add a new task for this.
This task will (generally) scrape a web page or use a public API to identify
the list of published software artefacts (git repos, debian source packages,
etc.)
Then, for each repository, a new task will be created to ingest this repository
and keep it up to date.
For example, to add a (one shot) task that will list git repos on the
0xacab.org gitlab instance, one can do (from this git repository):
```
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
swh scheduler task add list-gitlab-full \
-p oneshot api_baseurl=https://0xacab.org/api/v4
Created 1 tasks
Task 12
Next run: just now (2018-12-19 14:58:49+00:00)
Interval: 90 days, 0:00:00
Type: list-gitlab-full
Policy: oneshot
Args:
Keyword args:
api_baseurl=https://0xacab.org/api/v4
```
This will insert a new task in the scheduler. To list existing tasks for a
given task type:
```
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
swh scheduler task list-pending list-gitlab-full
Found 1 list-gitlab-full tasks
Task 12
Next run: 2 minutes ago (2018-12-19 14:58:49+00:00)
Interval: 90 days, 0:00:00
Type: list-gitlab-full
Policy: oneshot
Args:
Keyword args:
api_baseurl=https://0xacab.org/api/v4
```
To list all existing task types:
```
~/swh-environment/swh-docker-dev$ docker-compose exec swh-scheduler-api \
swh scheduler task-type list
Known task types:
load-svn-from-archive:
Loading svn repositories from svn dump
load-svn:
Create dump of a remote svn repository, mount it and load it
load-deposit:
Loading deposit archive into swh through swh-loader-tar
check-deposit:
Pre-checking deposit step before loading into swh archive
cook-vault-bundle:
Cook a Vault bundle
load-hg:
Loading mercurial repository swh-loader-mercurial
load-hg-from-archive:
Loading archive mercurial repository swh-loader-mercurial
load-git:
Update an origin of type git
list-github-incremental:
Incrementally list GitHub
list-github-full:
Full update of GitHub repos list
list-debian-distribution:
List a Debian distribution
list-gitlab-incremental:
Incrementally list a Gitlab instance
list-gitlab-full:
Full update of a Gitlab instance's repos list
list-pypi:
Full pypi lister
load-pypi:
Load Pypi origin
index-mimetype:
Mimetype indexer task
index-mimetype-for-range:
Mimetype Range indexer task
index-fossology-license:
Fossology license indexer task
index-fossology-license-for-range:
Fossology license range indexer task
index-origin-head:
Origin Head indexer task
index-revision-metadata:
Revision Metadata indexer task
index-origin-metadata:
Origin Metadata indexer task
```
### Monitoring activity
You can monitor the workers activity by connecting to the RabbitMQ console on
`http://localhost:5080/rabbitmq` or the grafana dashboard on
`http://localhost:5080/grafana`.
If you cannot see any task being executed, check the logs of the
`swh-scheduler-runner` service (here is a failure example due to the
debian lister task not being properly registered on the
swh-scheduler-runner service):
```
~/swh-environment/swh-docker-dev$ docker-compose logs --tail=10 swh-scheduler-runner
Attaching to swh-docker-dev_swh-scheduler-runner_1
swh-scheduler-runner_1 | "__main__", mod_spec)
swh-scheduler-runner_1 | File "/usr/local/lib/python3.7/runpy.py", line 85, in _run_code
swh-scheduler-runner_1 | exec(code, run_globals)
swh-scheduler-runner_1 | File "/usr/local/lib/python3.7/site-packages/swh/scheduler/celery_backend/runner.py", line 107, in <module>
swh-scheduler-runner_1 | run_ready_tasks(main_backend, main_app)
swh-scheduler-runner_1 | File "/usr/local/lib/python3.7/site-packages/swh/scheduler/celery_backend/runner.py", line 81, in run_ready_tasks
swh-scheduler-runner_1 | task_types[task['type']]['backend_name']
swh-scheduler-runner_1 | File "/usr/local/lib/python3.7/site-packages/celery/app/registry.py", line 21, in __missing__
swh-scheduler-runner_1 | raise self.NotRegistered(key)
swh-scheduler-runner_1 | celery.exceptions.NotRegistered: 'swh.lister.debian.tasks.DebianListerTask'
```
## Using docker setup development and integration testing
If you hack the code of one or more archive components with a virtual
env based setup as described in the
[[https://docs.softwareheritage.org/devel/developer-setup.html|developer
setup guide]], you may want to test your modifications in a working
Software Heritage instance. The simplest way to achieve this is to use
this docker-based environment.
If you haven't followed the
[[https://docs.softwareheritage.org/devel/developer-setup.html|developer setup guide]],
you must clone the the [swh-environment] repo in your `swh-environment`
directory:
```
~/swh-environment$ git clone https://forge.softwareheritage.org/source/swh-environment.git .
```
Note the `.` at the end of this command: we want the git repository to be
cloned directly in the `~/swh-environment` directory, not in a sub directory.
Also note that if you haven't done it yet and you want to hack the source code
of one or more Software Heritage packages, you really should read the
[[https://docs.softwareheritage.org/devel/developer-setup.html|developer setup guide]].
From there, we will checkout or update all the swh packages:
```
~/swh-environment$ ./bin/update
```
### Install a swh package from sources in a container
It is possible to run a docker container with some swh packages installed from
sources instead of using the latest published packages from pypi. To do this
you must write a docker-compose override file (`docker-compose.override.yml`).
An example is given in the `docker-compose.override.yml.example` file:
``` yaml
version: '2'
services:
swh-objstorage:
volumes:
- "$HOME/swh-environment/swh-objstorage:/src/swh-objstorage"
```
The file named `docker-compose.override.yml` will automatically be loaded by
`docker-compose`.
This example shows the simplest case of the `swh-objstorage` package:
you just have to mount it in the container in `/src` and the
entrypoint will ensure every swh-* package found in `/src/` is
installed (using `pip install -e` so you can easily hack your
code). If the application you play with has autoreload support, there
is no need to restart the impacted container.)
Note: if the docker fails to start when using local sources for one or more swh
package, it's most probably due to permission problems on cache files. For
example, if you have executed tests locally (using pytest or tox), you have
cache files (__pycache__ etc.) that will prevent `pip install` from working
within the docker.
The solution is to clean these files and directories before trying to spawn the
docker.
```
~/swh-environment$ find . -type d -name __pycache__ -exec rm -rf {} \;
~/swh-environment$ find . -type d -name .tox -exec rm -rf {} \;
~/swh-environment$ find . -type d -name .hypothesis -exec rm -rf {} \;
```
### Using locally installed swh tools with docker
In all examples above, we have executed swh commands from within a running
container. Now we also have these swh commands locally available in our virtual
env, we can use them to interact with swh services running in docker
containers.
For this, we just need to configure a few environment variables. First, ensure
your Software Heritage virtualenv is activated (here, using virtualenvwrapper):
```
~$ workon swh
(swh) ~/swh-environment$ export SWH_SCHEDULER_URL=http://127.0.0.1:5008/
(swh) ~/swh-environment$ export CELERY_BROKER_URL=amqp://127.0.0.1:5072/
```
Now we can use the `celery` command directly to control the celery system
running in the docker environment:
```
(swh) ~/swh-environment$ celery status
vault@c9fef1bbfdc1: OK
listers@ba66f18e7d02: OK
indexer@cb14c33cbbfb: OK
loader@61704103668c: OK
4 nodes online.
(swh) ~/swh-environment$ celery control -d loader@61704103668c pool_grow 3
```
And we can use the `swh-scheduler` command all the same:
```
(swh) ~/swh-environment$ swh scheduler task-type list
Known task types:
index-fossology-license:
Fossology license indexer task
index-mimetype:
Mimetype indexer task
[...]
```
### Make your life a bit easier
When you use virtualenvwrapper, you can add postactivation commands:
```
-(swh) ~/swh-environment$ cat >>$VIRTUAL_ENV/bin/postactivate <<EOF
+(swh) ~/swh-environment$ cat >>$VIRTUAL_ENV/bin/postactivate <<'EOF'
# unfortunately, the interface cmd for the click autocompletion
# depends on the shell
# https://click.palletsprojects.com/en/7.x/bashcomplete/#activation
shell=$(basename $SHELL)
case "$shell" in
"zsh")
autocomplete_cmd=source_zsh
;;
*)
autocomplete_cmd=source
;;
esac
eval "$(_SWH_COMPLETE=$autocomplete_cmd swh)"
export SWH_SCHEDULER_URL=http://127.0.0.1:5008/
export CELERY_BROKER_URL=amqp://127.0.0.1:5072/
export COMPOSE_FILE=~/swh-environment/swh-docker-dev/docker-compose.yml:~/swh-environment/swh-docker-dev/docker-compose.override.yml
alias doco=docker-compose
function swhclean {
find ~/swh-environment -type d -name __pycache__ -exec rm -rf {} \;
find ~/swh-environment -type d -name .tox -exec rm -rf {} \;
find ~/swh-environment -type d -name .hypothesis -exec rm -rf {} \;
}
EOF
```
This postactivate script does:
- install a shell completion handler for the swh-scheduler command,
- preset a bunch of environment variables
- `SWH_SCHEDULER_URL` so that you can just run `swh scheduler` against the
scheduler API instance running in docker, without having to specify the
endpoint URL,
- `CELERY_BROKER` so you can execute the `celery` tool (without cli options)
against the rabbitmq server running in the docker environment,
- `COMPOSE_FILE` so you can run `docker-compose` from everywhere,
- create an alias `doco` for `docker-compose` because this is way too
long to type,
- add a `swhclean` shell function to clean your source directories so that
there is no conflict with docker containers using local swh repositories (see
below). This will delete any `.tox`, `__pycache__` and `.hypothesis`
directory found in your swh-environment directory.
So now you can easily:
* Start the SWH platform:
```
(swh) ~/swh-environment$ doco up -d
[...]
```
* Check celery:
```
(swh) ~/swh-environment$ celery status
listers@50ac2185c6c9: OK
loader@b164f9055637: OK
indexer@33bc6067a5b8: OK
```
* List task-types:
```
(swh) ~/swh-environment$ swh scheduler task-type list
[...]
```
* Get more info on a task type:
```
(swh) ~/swh-environment$ swh scheduler task-type list -v -t load-hg
Known task types:
load-hg: swh.loader.mercurial.tasks.LoadMercurial
Loading mercurial repository swh-loader-mercurial
interval: 1 day, 0:00:00 [1 day, 0:00:00, 1 day, 0:00:00]
backoff_factor: 1.0
max_queue_length: 1000
num_retries: None
retry_delay: None
```
* Add a new task:
```
(swh) ~/swh-environment$ swh scheduler task add load-hg \
origin_url=https://hg.logilab.org/master/cubicweb
Created 1 tasks
Task 1
Next run: just now (2019-02-06 12:36:58+00:00)
Interval: 1 day, 0:00:00
Type: load-hg
Policy: recurring
Args:
Keyword args:
origin_url: https://hg.logilab.org/master/cubicweb
```
* Respawn a task:
```
(swh) ~/swh-environment$ swh scheduler task respawn 1
```
## Starting a kafka-powered replica of the storage
This repo comes with an optional `docker-compose.storage-replica.yml`
docker compose file that can be used to test the kafka-powered replication
mecanism for the main storage.
This can be used like:
```
~/swh-environment/swh-docker-dev$ docker-compose -f docker-compose.yml -f docker-compose.storage-replica.yml up -d
[...]
```
Compared to the original compose file, this will:
- overrides the swh-storage service to activate the kafka direct writer
on swh.journal.objects prefixed topics using thw swh.storage.master ID,
- overrides the swh-web service to make it use the replica instead of the
master storage,
- starts a db for the replica,
- starts a storage service based on this db,
- starts a replayer service that runs the process that listen to kafka to
keeps the replica in sync.
When using it, you will have a setup in which the master storage is used by
workers and most other services, whereas the storage replica will be used to
by the web application and should be kept in sync with the master storage
by kafka.
Note that the object storage is not replicated here, only the graph storage.
## Starting the backfiller
Reading from the storage the objects <object-type> from within range
[start-object, end-object] to the kafka topics.
```
(swh) $ docker-compose \
-f docker-compose.yml \
-f docker-compose.storage-replica.yml \
-f docker-compose.storage-replica.override.yml \
run \
swh-journal-backfiller \
snapshot \
--start-object 000000 \
--end-object 000001 \
--dry-run
```

File Metadata

Mime Type
text/x-diff
Expires
Fri, Jul 4, 11:09 AM (3 w, 6 d ago)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
3251639

Event Timeline

About · Developer information · Legal